{"title":"Xcessive Manufacturing","description":"","products":[{"product_id":"ae86-front-cross-member","title":"AE86 Front Cross Member","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eThis all new Front Cross Member is base on AE86 geometry but with a few definable features to help with high angle steering or motor swaps as well as a weight reduction over the stock unit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eAE86 fitment\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe chassis mount points and motor location stay true to the AE86 geometry for all 4 configurations. The changes are the steering rack location and the lower control arm mount point. Series 1 is stock, series 2 only moves the steering rack forward, Series 3 and 4 move the lower control arm mount point and rack. See below for details on the different series.\u003c\/p\u003e\n\u003cp\u003eSome motor swaps require the use of 1\" frame spacers, we have designed a \"Raised Height Mount\" option that eliminates the need for 1\" spacers. Simply select it in the products list and add to cart and we will custom fabricate your crossmember of choice with the raised mounts!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eOther fitment\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe've put in RA Celica mount points but have made the mounting pads fairly large and flat so they can easily be modified for many other swaps. We've used this cross member in several swaps including early Cressidas and TE's, most anything that requires a rack and pinion swap and a front sump oil pan configuration. It's important to note that the front suspension geometry is based on AE86, it's typically between 1\/2\" to 5\/8\" wider per side then RA. We also make several motor swap bracket sets based on the AE86 geometry, if it's designed to fit an AE, it'll fit this crossmember. Contact us if you'd like more information. The raised height mount option does not fit RA Celica frames due to the pinch welds of the RA chassis going downward past the frame. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eSteering rack fitment\u003c\/span\u003e\u003cspan style=\"color: #3366ff;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff;\"\u003e\u003cspan style=\"color: #000000;\"\u003eOur rack mount blocks allow stock AE86 type rack fitment including AW11 manual rack swaps common on the AE. The rack position is selectable and differ by 1\". The kit also comes new rack straps and strap bolting hardware. Rack bushings are NOT included. You will need to take into consideration that moving the rack forwards will require lengthening the steering column. Most columns can pull out 1\" without problem, but you will need evaluate your own situation for safety when assembled.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eSeries 1 and Series 2\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Series 1 and 2 crossmembers both have the lower suspension mount point and the main cross beam in the stock location. The Series 1 leaves the steering rack in the stock location while the Series 2 moves the rack forwards 1\" for better oil pan brace clearance on motor swaps like the BEAMS with power steering as well as better geometry for high angle steering. The 1\" forward rack location allows the elimination of offset rack ends that tend to bend the steering rack due to the offset leverage problem. The Series 2 CAN NOT be used with offset rack ends due to the rack position in relation to the main cross beam and suspension inner point.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eSeries 3 and Series 4\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Series 3 and 4 crossmembers both have the lower suspension mount point and the main cross beam 1\" farther forwards then stock AE86. The Series 3 has the steering rack 1\" forward from stock while the Series 4 moves the rack forwards 2\". This is a major upgrade for guys running high angle knuckles as it's dramatically farther forwards then possible with offset rack ends. The Series 4 CAN NOT be used with offset rack ends due to the rack position in relation to the main cross beam and suspension inner point.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eOil Pan Clearance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Series 1 is the only version that will have stock like pan fitment, the Series 2, 3 and 4 have the steering rack moved forwards. The forward mounted rack positions help with motor swaps where the oil pans have a rear brace built in such as BEAMS pans. The relocated forward rack can eliminate the need for cutting of BEAMS pans when motor brackets are used that are lower then our standard AE86 to BEAMS brackets. Other front sump motors such as JZ and 1UZ front sumps do not have rear pan clearance issues with the stock type fitment associated with the Series 1 crossmember geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eRHD and LHD\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e In our design of the new crossmember, we've made it configureable for both Right Hand Drive and Left Hand Drive. Just select your chassis fitment and we'll set it up!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eConstruction\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThe main cross beam is a single piece of box steel with a .125\" (3.2mm) wall with all supporting brackets formed to fit directly wherever possible. Formed components helps to eliminate a bunch of puzzle pieces with welds on all sides. The reduction of welded puzzle pieces helps control the overall shape, accuracy and strength due to less heat distortion caused by all those welds. All the supporting gussets and fabrications are also .125\" (3.2mm) thick steel, up to 100% thicker then stock in some areas and no spot welding of layers together to get thickness.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"LHD Series 1 \/ NONE","offer_id":66786613526832,"sku":"T-AE86-FCM-LHD-S1","price":615.0,"currency_code":"USD","in_stock":true},{"title":"LHD Series 1 \/ Raised Height Mount","offer_id":66786613559600,"sku":"T-AE86-FCM-HD-S2-RH","price":659.0,"currency_code":"USD","in_stock":true},{"title":"LHD Series 2 \/ None","offer_id":66786613592368,"sku":"T-AE86-FCM-LHD-S2","price":615.0,"currency_code":"USD","in_stock":true},{"title":"LHD Series 2 \/ Raised Height Mount","offer_id":66786613625136,"sku":"T-AE86-FCM-LHD-S2-RH","price":659.0,"currency_code":"USD","in_stock":true},{"title":"LHD Series 3 \/ None","offer_id":66786613657904,"sku":"T-AE86-FCM-LHD-S3","price":615.0,"currency_code":"USD","in_stock":true},{"title":"LHD Series 3 \/ Raised Height Mount","offer_id":66786613690672,"sku":"T-AE86-FCM-LHD-S3-RH","price":659.0,"currency_code":"USD","in_stock":true},{"title":"LHD Series 4 \/ None","offer_id":66786613723440,"sku":"T-AE86-FCM-LHD-S4","price":615.0,"currency_code":"USD","in_stock":true},{"title":"LHD Series 4 \/ Raised Height Mount","offer_id":66786613756208,"sku":"T-AE86-FCM-LHD-S4-RH","price":659.0,"currency_code":"USD","in_stock":true},{"title":"RHD Series 1 \/ None","offer_id":66786613788976,"sku":"T-AE86-FCM-RHD-S1","price":615.0,"currency_code":"USD","in_stock":true},{"title":"RHD Series 1 \/ Raised Height Mount","offer_id":66786613821744,"sku":"T-AE86-FCM-RHD-S1-RH","price":659.0,"currency_code":"USD","in_stock":true},{"title":"RHD Series 2 \/ None","offer_id":66786613854512,"sku":"T-AE86-FCM-RHD-S2","price":615.0,"currency_code":"USD","in_stock":true},{"title":"RHD Series 2 \/ Raised Height Mount","offer_id":66786613887280,"sku":"T-AE86-FCM-RHD-S2-RH","price":659.0,"currency_code":"USD","in_stock":true},{"title":"RHD Series 3 \/ None","offer_id":66786613920048,"sku":"T-AE86-FCM-RHD-S3","price":615.0,"currency_code":"USD","in_stock":true},{"title":"RHD Series 3 \/ Raised Height Mount","offer_id":66786613952816,"sku":"T-AE86-FCM-RHD-S3-RH","price":659.0,"currency_code":"USD","in_stock":true},{"title":"RHD Series 4 \/ None","offer_id":66786613985584,"sku":"T-AE86-FCM-RHD-S4","price":615.0,"currency_code":"USD","in_stock":true},{"title":"RHD Series 4 \/ Raised Height Mount","offer_id":66786614018352,"sku":"T-AE86-FCM-RHD-S4-RH","price":659.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_front_cross_member1.jpg?v=1778847873"},{"product_id":"ae86-steering-rack-and-parts","title":"AE86 Steering Rack and Parts","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eWhen you want to put a fast ratio manual rack in your car, there aren't a lot of options, this manual rack is a good way to go.\u003c\/p\u003e\n\u003cp\u003eThese all new racks are made to fit the AE86 Corolla front crossmember with a 2.5 turn lock to lock ratio for fast, accurate steering. They work quite nicely in our front cross members!\u003c\/p\u003e\n\u003cp\u003eBuilt to factory Corolla specs, we've also sourced new inner tie rods and boots as well as the hard to find small spline steering universal joint. If you're converting from power steering, you'll need this joint. If you're replacing a worn out rack, you may just want to check your universal joint for age and wear.\u003c\/p\u003e\n\u003cp\u003eIt's important to note that the manual racks are a bit shorter at the input shaft then the power racks, so you will need to pull your lower steering shaft out a bit to get the lower universal joint to fit up properly. If you're concerned that you may just pull it out to far, we also have a new steering shaft that's longer.\u003c\/p\u003e\n\u003cp\u003e  We also offer urethane rack bushings if you want to tighten up the rack while you're in there as well as new rack straps if you need those as well.\u003c\/p\u003e\n\u003cp\u003eIt should also be noted that the power racks have a longer inner tie rod then manual racks and thusly shorter outer tie rods. The inner tie rods we sell are a longer version to be used with the shorter FWD Corolla outer tie rods. If you use the longer RWD outer tie rods, the combination will be to long unless you're extending your LCA's quite a bit.\u003c\/p\u003e\n\u003cp\u003eBushing color is Green.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"None \/ None","offer_id":66786616574256,"sku":"T-AE86-SR-FR","price":298.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Bushings and rack straps","offer_id":66786616607024,"sku":"T-AE86-SR-FR, T-AE86-SRB-K1, T-AE86-SRS","price":424.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Rack bushing set - Manual rack","offer_id":66786616639792,"sku":"T-AE86-SR-FR,T-AE86-SRB-K1","price":359.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Steering rack straps","offer_id":66786616672560,"sku":"T-AE86-SR-FR, T-AE86-SRS","price":363.0,"currency_code":"USD","in_stock":true},{"title":"AE86 Inner tie Rods - Pair \/ None","offer_id":66786616705328,"sku":"T-AE86-SR-FR, T-AE86-SR-ITR-P","price":342.5,"currency_code":"USD","in_stock":true},{"title":"AE86 Inner tie Rods - Pair \/ Bushings and rack straps","offer_id":66786616738096,"sku":"T-AE86-SR-FR, T-AE86-ITR-P, T-AE86-SRB-K1, T-AE86-SRS","price":459.0,"currency_code":"USD","in_stock":true},{"title":"AE86 Inner tie Rods - Pair \/ Rack bushing set - Manual rack","offer_id":66786616770864,"sku":"T-AE86-SR-FR, T-AE86-ITR-P, T-AE86-SRB-K1","price":404.0,"currency_code":"USD","in_stock":true},{"title":"AE86 Inner tie Rods - Pair \/ Steering rack straps","offer_id":66786616803632,"sku":"T-AE86-SR-FR, T-AE86-ITR-P, T-AE86-SRS","price":407.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_steering_rack_and_parts0.jpg?v=1778848120"},{"product_id":"3sge-beams-blacktop-exhaust-flange-mid","title":"3SGE Beams Blacktop Exhaust Flange - MID","description":"\u003cp\u003eIf you're looking to use your factory Beams Blacktop upper header and need a mid flange to make the lower half, this is the flange you'll want.\u003c\/p\u003e\n\u003cp\u003eLaser cut from 3\/8\" thick stainless, they weld excellent and fit nice, definitely an easy way to start.\u003c\/p\u003e\n\u003cp\u003eThere will be some discoloration and clean up from the laser process, this will not affect the fabrication process.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618376496,"sku":"T-3SGE-B-EF-M","price":51.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/2jz_vvt_header_y_flange1_copy_1.jpg?v=1778848234"},{"product_id":"ae86-to-manual-transmission-cross-member-w58-r154","title":"AE86 to Manual Transmission Cross Member (W58, R154)","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eIf your doing a 1UZ swap in your AE86 with our motor mount brackets, you might like this transmission cross member. It's designed to work with both the R154 and W58 transmissions and fit the chassis without any modifications. We've supplied all the required bolts for the cross member to chassis mounting and made the bracket to accommodate both stock transmission rubber mounts and our Urethane trans mount.\u003c\/p\u003e\n\u003cp\u003eToyota has two rubber trans mounts, you will need the mount with a bolt spacing of 2.2\" or 56MM side to side. The larger mount will not fit. Our urethane mount has the correct spacing (T-UTM-S1). We also have hybrid mounts for using late model manual transmissions with this TCM. Urethane Trans mount NOT included.\u003c\/p\u003e\n\u003cp\u003eThis cross member only works for the AE chassis with a W58 or R154, it does not work with the BEAMS 6 speed or Auto transmissions.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618409264,"sku":"T-AE86-MT-TCM","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_to_manual_transmission_cross_member_w58_r154_1_1.jpg?v=1778848234"},{"product_id":"ae86-bc-racing-coil-overs","title":"AE86 BC Racing Coilovers","description":"\u003cp\u003eIf you're looking to lower your AE86, these BC coilovers are a great way to get the job done.\u003c\/p\u003e\n\u003cp\u003eThe BC coils also have standard top mount 30 position dampener adjusters, adjustable camber plates on the front, wrenches and factory supplied instructions. We try to keep them in stock but it can take us a few weeks to restock if we get behind. Please contact us direct prior to ordering if you need the coils on a tight timeline!\u003c\/p\u003e\n\u003cp\u003eThe front coils\/struts require cutting off the stock front spindle so it can be welded to the new BC Coilover base.\u003c\/p\u003e\n\u003cp\u003eWhen in stock, coils are shipped from our shop in the original packaging.\u003c\/p\u003e\n\u003cp\u003eWe can also weld on your front strut mounts, please contact us for info and pricing!\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618442032,"sku":"T-AE86-CO","price":1195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_bc_racing_coil_overs_1.jpg?v=1778848234"},{"product_id":"ae86-beams-6-speed-trans-cross-member","title":"AE86 Beams 6 Speed Trans Cross Member","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eWhen you do your BEAMS swap with the 6 speed trans (J160), you're going to want a trans crossmember that'll bolt right in. If you go with our motor mount brackets, this crossmember will put it all together nicely.\u003c\/p\u003e\n\u003cp\u003eMade from a single piece of formed steel, you won't have any issues with welds cracking, ever. We've also powder coated it to keep it from rusting.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKit includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAE86 to J160 transmission crossmember\u003c\/p\u003e\n\u003cp\u003eBolting hardware for TCM to chassis.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618507568,"sku":"T-AE86-BEAMS-TCM","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_beams_6_speed_trans_cross_member1.jpg?v=1778848234"},{"product_id":"3sge-beams-exhaust-flange-stainless","title":"3SGE Beams Exhaust Flange - Stainless","description":"\u003cp\u003eWe've made the stainless exhaust flanges as a great starting point for your custom header on that Toyota 3SGE Beams.\n\u003cbr\u003eLaser cut from 3\/8\" thick stainless, they weld excellent and fit nice, definitely an easy way to start.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618605872,"sku":"T-3SGE-B-EF-SS","price":102.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/3sge_beams_exhaust_flange_-_stainless1_copy.jpg?v=1778848234"},{"product_id":"ae86-steering-rack-straps","title":"AE86 Steering Rack Straps","description":"\u003cp\u003eThese all new rack straps are made to be used with the AE86 front cross member and steering racks. The straps are formed from .125\" (3.2mm) steel then doubled up where needed for bushing alignment or on bolting flanges.\u003c\/p\u003e\n\u003cp\u003eThe new straps are made to be just a bit tighter then the stock straps. It'll take a bit more to pull them in, so we've provided new longer bolting hardware to help with installation.\u003c\/p\u003e\n\u003cp\u003eIf you've sourced an original AE86 front cross member and can't find the rack straps, this is your answer!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eParts included\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDriver side strap\u003c\/p\u003e\n\u003cp\u003ePassenger side strap\u003c\/p\u003e\n\u003cp\u003eBolting hardware\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Yes","offer_id":66786618671408,"sku":"T-AE86-SRS, T-AE86-SRB-K1","price":121.5,"currency_code":"USD","in_stock":true},{"title":"No","offer_id":66786618704176,"sku":"T-AE86-SRS","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_steering_rack_straps1_1.jpg?v=1778848234"},{"product_id":"beams-itb-filter-plate-series-1","title":"Beams ITB Filter Plate - Series 1","description":"\u003cp\u003eWhen you swap out your stock intake for ITB's, you'll want to run a filter to keep that motor swap alive!\u003c\/p\u003e\n\u003cp\u003eWe've made our aluminum base plate to work with our ITB adapter spacing, just unbolt your velocity stacks and put the plate in between.\u003c\/p\u003e\n\u003cp\u003eTo help with fitment in most cars, definitely in an AE86, we've shifted the filter forward for better firewall clearance.\u003c\/p\u003e\n\u003cp\u003eThe base plate is designed to be used with a Pipercross foam filter and will handle up to 100mm tall air horns on top Toyota Silver or Black top ITB's.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003eThis filter adapter DOES NOT work with stock ITB spacing, it will not fit the actual Silver top or Black top motors or other ITB adapters with stock port spacing.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cem\u003e\u003cstrong\u003eThis plate is not sold with with the filter!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKit includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAluminum filter base plate\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618540336,"sku":"T-BEAMS-ITB-FP-S1","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/beams_itb_filter_plate_-_series_1.jpg?v=1778848234"},{"product_id":"corolla-celica-front-frame-spacers-2-0-aluminum-with-bolts","title":"Corolla\/Celica Front Frame Spacers, 2.0\" Aluminum with bolts","description":"\u003cp\u003eIf you're doing a motor swap on your E chassis, hood and trans tunnel clearance can become an issue. Installing front frame spacers can help a lot with this problem. We've made these spacers from 2\" solid aluminum bar stock so they fit easy and take any load you can dish out. We've also supplied the bolting hardware you'll need to put it all together.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618638640,"sku":"T-Exx-FFS-S3","price":118.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/e_chassis_front_frame_spacers_2.0_aluminum_with_bolts1.jpg?v=1778848234"},{"product_id":"beams-power-steering-belt","title":"Beams Power Steering Belt","description":"\u003cp\u003eWe've sourced these new belts to work with the BEAMS power steering pump in the factory location without AC. They're just the right length to just fit and allow the use of the factory tensioner pulley.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618474800,"sku":"T-BEAMS-PSB-425","price":19.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/beams_power_steering_belt.jpg?v=1778848234"},{"product_id":"ae86-radiator-fan-shroud-kit","title":"AE86 Radiator Fan Shroud Kit","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cspan style=\"color: #000000;\"\u003eIf you've done a BEAMS swap on your AE86 and go with the Koyo BEAMS Aluminum radiator, you'll want a fan and shroud to go with it\u003c\/span\u003e\u003c\/span\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003e.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur aluminum shroud is made from .125\" thick 6061 T6 sheet with mounting holes to bolt directly onto the Koyo radiator. We've also included a 14\" slim line fan that will bolt directly to the shroud, no extra tabs or mounts required.\u003c\/p\u003e\n\u003cp\u003eAll required bolting hardware is included for the fan to shroud, the only part we recommend is getting is some foam tape to seal off any gaps between the shroud and radiator for maximum cooling.\u003c\/p\u003e\n\u003cp\u003eThe 14\" fan is rated at 2000 CFM @ 7 amps draw and sits at 3.0\" thick when measured from the shroud face .\u003c\/p\u003e\n\u003cp\u003eWe have not tested the shroud on stock radiators. If you'd like to measure one, we can compare the dimensions for fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003eRadiator not included\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618736944,"sku":"T-AE86-FS-K","price":141.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_radiator_fan_shroud2_1.jpg?v=1778848234"},{"product_id":"ae86-steering-rack-bushing-passenger-side-aw11","title":"AE86 Steering Rack Bushing - Passenger Side (AW11)","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eThe stock passenger side bushing on Corollas won't hold an AW11 manual rack swap, you'll need a smaller bushing to do the job.\u003c\/p\u003e\n\u003cp\u003eThe new Passenger side bushing is a two piece design that adapts down to the AW11 rack. Made from 95A durometer Urethane this bushing is nice and stiff to hold the rack in place.\u003c\/p\u003e\n\u003cp\u003eSteering rack, cross member and drivers side bushing not included.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eParts included\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePassenger side bushing, actual color is green.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618573104,"sku":"T-AE86-SRB-P1","price":30.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae-rb-ps_copy.jpg?v=1778848234"},{"product_id":"ae86-steering-rack-bushing-driver-side","title":"AE86 Steering Rack Bushing - Driver Side","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eThe Driver side bushing does all the holding of the side to side movement for the rack, a good driver side bushing is a must for accurate, responsive steering.\u003c\/p\u003e\n\u003cp\u003eThe new Driver side bushing is a split one piece design that fits a bit tighter then stock and is made from 95A durometer Urethane, this bushing is nice and stiff to hold the rack in place!\u003c\/p\u003e\n\u003cp\u003eSteering rack, cross member and Passenger side bushing not included.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eParts included\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDriver side bushing, actual color is green\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786619228464,"sku":"T-AE86-SRB-D","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae-rb-ds_copy.jpg?v=1778848234"},{"product_id":"aexx-urethane-motor-mounts-series-11","title":"AE86 Urethane Motor Mounts - Series 11","description":"\u003cp\u003eIf your E chassis runs hard, has a higher HP swap or just has worn out stock rubber mounts, you'll want to replace them with these Urethane mounts. We've built them with a one piece formed steel base and one piece cast upper section then plated all the parts for good corrosion resistance. The mounts have a double cross pin design with inner steel sleeves on the bushings\/bolts. They come with standard 80A (firmer orange) bushing but have a choice of 65A (softer yellow) bushings ( bushings are replaceable\/serviceable).\u003c\/p\u003e\n\u003cp\u003eThe mounts also have a lifetime warranty for manufacturing defects and will definitely hold plenty of power and look good doing it. The mounts come standard with the 80A firmer orange bushings. If you would like the softer 65A yellow bushings, just leave us a note in the order details.\u003c\/p\u003e\n\u003cp\u003eThe last 2 pics show the mount installed in an AE86 with our BEAMS motor bracket. BEAMS motor brackets not included with urethane mounts.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Orange 80A (normal)","offer_id":66786618900784,"sku":"T-Exx-UMM-S11-O","price":227.5,"currency_code":"USD","in_stock":true},{"title":"Yellow 65A (softer)","offer_id":66786618933552,"sku":"T-Exx-UMM-S11-Y","price":227.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/aexx_urethane_motor_mounts_-_series_11_1.jpg?v=1778848234"},{"product_id":"ae86-rcas-series-2","title":"AE86 Roll Center Adjusters - Series 2","description":"\u003cp\u003eWe've made these RCA's for the AE86 chassis for lowered cars that need some roll center adjustment on up front. These series 2 RCA's have a height of 1.25\" (32mm).\u003c\/p\u003e\n\u003cp\u003eThe RCA's are machined from billet 6061 T6 aluminum and then nickel plated for corrosion resistance. We've also pressed in steel locator sleeves for spot on alignment like the factory uses and supplied longer bolts for the set up as well.\u003c\/p\u003e\n\u003cp\u003eSold in pairs. Steering arms not included.\u003c\/p\u003e\n\u003cp\u003ePlease check how much roll center adjustment you require, it is possible to put in to much and potentially cause a bind in steering components.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618769712,"sku":"T-AE86-RCA-S2","price":163.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_rca_s_-_series_2_1__1.jpg?v=1778848234"},{"product_id":"ae86-steering-rack-bushings-manual-rack","title":"AE86 Steering Rack Bushings - Manual rack","description":"\u003cp\u003e  This kit includes both the Driver and Passenger side Urethane bushings for manual and AW11 racks into the AE86 cross member.\u003c\/p\u003e\n\u003cp\u003e   The driver side is a one piece wrap around design similar to the factory bushing, while the Passenger side is a two piece that adapts from the AE86 mount to the smaller tube diameter of the manual or AW11 manual rack. Both bushings are made from 90A Urethane for long life and solid hold.\u003c\/p\u003e\n\u003cp\u003eThe passenger side bushing does not fit power racks.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eParts included\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDriver side bushing\u003c\/p\u003e\n\u003cp\u003ePassenger side set of two pieces\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Passenger side (AW11)","offer_id":66786618802480,"sku":"T-AE86-SRB-P","price":30.75,"currency_code":"USD","in_stock":true},{"title":"Driver side","offer_id":66786618835248,"sku":"T-AE86-SRB-D","price":33.0,"currency_code":"USD","in_stock":true},{"title":"Passenger+Driver Side","offer_id":66786618868016,"sku":"T-AE86-SRB-K","price":61.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae-rb_copy.jpg?v=1778848234"},{"product_id":"ae86-spring-pads-2-6-axle-tube","title":"AE86 Spring Pads - 2.6\" Axle Tube","description":"\u003cp\u003eIf you're doing that new axle for your E chassis, you might think about these new spring pads to go along with the new axel brackets and sway bar pads. We make these pads from 1\/8\" steel, formed and welded from all new material, no cut off pieces. They're designed to fit the stepped axle tube typical to Toyota rear ends that are 2.5\"\/2.6\" diameter but can easily be fit up to 2.8\" diameter. The pads are made to fit with a stock type Coil spring with a minimum ID of 4.25\" and a maximum OD of 5.5\" common to the AE86.\u003c\/p\u003e\n\u003cp\u003eThese pads are for 2.5\/2.6\" diameter axles!! If you're running a closer to 3\" or 3.25\" axle tube, we have pads for that as well.\u003c\/p\u003e\n\u003cp\u003eThese pads do not fit the springs typically found in RA series Celicas.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786618966320,"sku":"T-Exx-2.6-SP","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/2.6_axle_spring_pad_pair.jpg?v=1778848234"},{"product_id":"ae86-steering-arms-zero-ackerman","title":"AE86 Steering arms - Zero Ackerman","description":"\u003cp\u003eXcessive's new Zero Ackerman steering arms for the AE86 chassis are the ticket for higher steering angles and a faster ratio. We've quickened the ratio just a bit compared to the popular power knuckles along with removing the ackerman to give you more performance all the way around for drifting but without being to fast and twitchy.\u003c\/p\u003e\n\u003cp\u003eOur arms are CAD designed to give significantly more angle then other arms on the market that have \"adjustment holes\" that end up causing interference long before good angle is achieved. Just moving the tie rod farther forward isn't the answer if the geometry doesn't work with the rest of the components like rack travel, tie rod ends and lower control arms.\u003c\/p\u003e\n\u003cp\u003eWe've also made these arms with the stock taper on both the lower ball joint and the outer tie rod, you can retain stock outer tie rods or run heim outers with taper adapters.\u003c\/p\u003e\n\u003cp\u003eStock tie rod ends may not be long enough due to the removal of the Ackerman. There is approximately a 1\/2\" increase in tie rod length required per side.\u003c\/p\u003e\n\u003cp\u003eGoing with our tested and proven construction of our heavier Cressida arms, we've made these with the same materials and processes for proven results. They're an all steel design designed to take a beating with machined tapers and steel locator sleeves just like the factory arms.\u003c\/p\u003e\n\u003cp\u003eSold in pairs. Heim outer not included.\u003c\/p\u003e\n\u003cp\u003eThese Zero Ackerman arms are not recommended for street driving.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786619195696,"sku":"T-AE86-SA-ZA","price":261.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_steering_arms_-_zero_ackerman1.jpg?v=1778848234"},{"product_id":"beams-itb-filter-kit-series-1","title":"Beams ITB Filter Kit - Series 1","description":"\u003cp\u003eWhen you swap out your stock intake for ITB's, you'll want to run a filter to keep that motor swap alive!\u003c\/p\u003e\n\u003cp\u003eWe've made our aluminum base plate to work with our ITB adapter spacing, just unbolt your velocity stacks and put the plate in between.\u003c\/p\u003e\n\u003cp\u003eWe've also supplied a high quality Pipercross foam filter that will fit up to 100mm air horns. The Pipercross filter is washable and re-useable. For maximum dust filtering, it's recommended to use an air filter oil on the foam.\u003c\/p\u003e\n\u003cp\u003eTo help with fitment in most cars, definitely in an AE86, we've shifted the filter forward for better firewall clearance.\u003c\/p\u003e\n\u003cp\u003eThe base plate is designed to be used with a Pipercross foam filter and will handle up to 80mm tall air horns on top Toyota Silver or Black top ITB's.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003eThis filter adapter DOES NOT work with stock ITB spacing, it will not fit the actual Silver top or Black top motors or other ITB adapters with stock port spacing.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKit includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAluminum filter base plate\u003c\/p\u003e\n\u003cp\u003ePipercross filter\u003c\/p\u003e\n\u003cp\u003eThumb screw quick screws\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786619359536,"sku":"T-BEAMS-ITB-FK-S1","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/beams_itb_filter_plate_kit_-_series_1_1.jpg?v=1778848234"},{"product_id":"ae86-clutch-pedal-mount-lhd","title":"AE86 Clutch Pedal Mount - LHD","description":"\u003cp\u003eIf you're doing a 5 speed swap on your AE863 chassis, you're going to need one of these. This is a readily available clutch pedal that's a direct bolt in for the AE86 chassis requiring no modifications to the sheet metal on the car to mount it up, only some trimming on the sound deadening under the dash may be required.\u003c\/p\u003e\n\u003cp\u003eThe AE86 has factory mounting points that we've utilized for a direct bolt in fitment that puts the master in stock location in the engine bay and sits the pedal nicely in the cab.\u003c\/p\u003e\n\u003cp\u003eThe main bracket is formed 1\/8\" steel while the hanging pedal arm is 1\/4\" steel on a 12mm pivot with a curved pad.\u003c\/p\u003e\n\u003cp\u003eWe've also provided all the bolting hardware for the clutch mount and the master cylinder hook ups.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ePlease note this pedal is made for LHD USDM cars.\u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Pedal only \/ None","offer_id":66786618999088,"sku":"T-AE86-CPM","price":177.5,"currency_code":"USD","in_stock":true},{"title":"Pedal only \/ Pedal Pad","offer_id":66786619031856,"sku":"T-AE86-CPM-Pedal-Pad","price":185.45,"currency_code":"USD","in_stock":true},{"title":"Pedal and Master \/ None","offer_id":66786619064624,"sku":"T-AE86-CPM-K","price":230.95,"currency_code":"USD","in_stock":true},{"title":"Pedal and Master \/ Pedal Pad","offer_id":66786619097392,"sku":"T-AE86-CPM-K-Pedal-Pad","price":223.0,"currency_code":"USD","in_stock":true},{"title":"Master Only \/ None","offer_id":66786619130160,"sku":"CM-S2","price":45.5,"currency_code":"USD","in_stock":true},{"title":"Master Only \/ Pedal Pad","offer_id":66786619162928,"sku":"CM-S2-Pedal-Pad","price":53.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/AE86ClutchPedalMountLHD2.jpg?v=1778848234"},{"product_id":"ae86-beams-motor-mount-brackets-series-1","title":"AE86 BEAMS Motor Mount Brackets - Series 1","description":"\u003cp\u003eAs the originator of the AE86 BEAMS swap kit, our affordable motor mount brackets are designed to drop the Beams motor into position with the least amount of guess work on where it should go for an easy install. To make it all go in without any fabrication, we've also made a simple transmission cross member that lines up the tail end as well with the J160 6 speed transmission, when used with our one piece drive line and our shifter relocation, the swap is easy!!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eGeneral fitment:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe BEAMS motor has two units on the back of the head that will require the firewall to be clearanced. This positioning of the motor allows the use of the factory sway bar without any extra brackets. Clearancing is easily done with a bit of hammering, no cutting is required on the firewall or trans tunnel. See below for steering rack info.\u003c\/p\u003e\n\u003cp\u003eThere also seems to be some confusion about how the engine will sit. The front crossmember has slots as well as our brackets. Once the engine is placed, these slots allow the engine to be shifted a bit to square it up. Most of the time, if you do not take the time to square it up, it will sit however you dropped it in.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eManual steering:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNo modifications to the oil pan are required for manual (non power) steering racks. You do not need to remove the pan from the motor and cut it up! Most motors come with a 30 day start up warranty, removing the pan and cutting it will probably void any warranty and push your timeline outside the 30 warranty window to get it all done. \"Lower profile\" motor brackets would require modifications to the oil pan and further expose the front sump oil pan to damage from the bottom.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003ePower steering:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese brackets allow the use of the stock power steering rack with only a minor modification to the support flange on the lower rear of the oil pan to clear for the center PS hard line. You do not need to remove the power steering rack or cut off the lower section of the pan\/trans brace. The modification is about 1.5\" to 2\" hole in the support flange for the center hard line on the rack. You do not need to remove the pan for this modification. The addition of our fast ratio AE steering arms to your car will net the steering angle and quickness of the popular manual rack swaps. \"Lower profile\" motor brackets would require severe modifications to the oil pan and further expose the front sump oil pan to damage from the bottom.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eHood fitment:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen used with our 1.5\" front frame spacers, no cutting of the under hood bracing is required and minimal trans tunnel clearance work is required. If you opt for thinner spacers (1\"), you can still get the motor to fit under the hood skin and will only need to cut the under hood bracing for fitment in the motor well. There will be a need for more work on the transmission tunnel for fitment if you run a thinner spacer or none at all. \u003cspan style=\"color: #ff0000;\"\u003e**Using no front frame spacers will require hood cutting and a fair bit of fitment inside the trans tunnel.**\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe last two pictures show the BEAMS installation with our urethane AE motor mounts (T-Exx-UMM-S11), these are not included with the motor brackets. Our motor brackets will fit with stock rubber mounts, we just don't recommend stock rubber mounts if you plan any \"spirited driving\".\u003c\/p\u003e\n\u003cp\u003eIf you're going to use the stock BEAMS 6 speed (J160) manual transmission, we also have a transmission cross member and urethane transmission mount that will help things to fit right in, when coupled with our one piece driveline, the installation can typically be done in one day. If you have your wiring, intake parts and fuel lines, you can fire the motor up in one weekend, add some radiator hoses, cooling fan and you could be driving a BEAMS swap in only a few days!\u003c\/p\u003e\n\u003cp\u003eThese brackets will also fit the TE cross member but the stock TE steering may need fitment work. Our TE test cars have had rack and pinion swaps and did not retain stock TE steering.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eMaterial and Design\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMade from 1\/4\" laser cut steel, formed, gusseted and plated, these mounts are simple, strong and accurate. Our manufacturing design uses only 1 part to build the main bracket structure and then add a gusset. This 1 + 1 design allows us to supply a strong, quality product with less welding making manufacturing accurate and efficient. We've also included new bolting hardware so you don't have to use the old bolts that are probably getting messed up from age and grit anyway.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eKit includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDriver and Passenger motor brackets\u003c\/p\u003e\n\u003cp\u003eBlock bolting hardware\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786619294000,"sku":"T-AE86-BEAMS-MMB-S1","price":127.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_beams_motor_mount_brackets_-_series_1_1.jpg?v=1778848234"},{"product_id":"ae86-spring-pads-3-0-axle-tube","title":"AE86 Spring Pads - 3.0\" Axle Tube","description":"\u003cp\u003eIf you're doing that new axle for your E chassis, you might think about these new spring pads to go along with the new axle brackets and sway bar pads. We make these pads from 1\/8\" steel, formed and welded from all new material, no more old cut off pieces. They're designed to fit 3.0\" diameter axles but work good from 2.87\" to 3.25\" diameter axles, you will need to grind the tips of the fit arcs just a bit for the larger axle tubes. The pads are made to fit with a stock type Coil spring with a minimum ID of 4.25\" and a maximum OD of 5.5\" common to the AE86.\u003c\/p\u003e\n\u003cp\u003eThese pads are for 3\" axle tubes!! Minor adjustment is required for 3.25\" diameter axles. If you're running a 2.5\"\/2.6\" axle tube, we have pads for that as well.\u003c\/p\u003e\n\u003cp\u003eThese are sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThese pads do not fit the springs typically found in RA series Celica's.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786619261232,"sku":"T-Exx-3.0-SP","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/3.0_axle_spring_pad_pair2.jpg?v=1778848234"},{"product_id":"beams-alternator-bracket-kits","title":"BEAMS Alternator Bracket kits","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eIf your BEAMS alternator goes bad or you just want the peace of mind of running a readily available JZ alternator, then our bracket is for you! You may be able to source a BEAMS alternator or possibly a retrofit version designed to bolt in, but what do you do when it goes bad again? Our bracket allows the use of the common Toyota\/Lexus Alternator available worldwide, all the other benefits are listed below!!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003eGeneral fitment \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe all new alternator bracket bolts onto the stock 3 mounting points on the side of the engine block, this ensures a solid base for the bracket to do it's job. The new alternator is from any JZ from '95 to '05 with a 2.8\" (71mm) pulley ('98-'05 GS300 is a good choice). The pulley is slightly larger then the BEAMS which will reduce the peak RPM on the alternator and prolong it's life, it's also needed for proper belt fitment. While the JZ pulley is a 6 rib, the BEAMS 4 rib belt drive will align properly, no need to change pulleys.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003eElectrical connections \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThe JZ alternator uses the same plug type as the BEAMS for the excite wires and the same size post for the power wire. The location of the two connections are quite close to the BEAMS locations making hook ups easy. The difficulty with other alternator kits is the placement of the power wire right up against the engine block leaving nearly no room for error to cause a dead short and potential fire. The excite circuit is another benefit with the JZ alternator as the circuit is identical to the function of the BEAMS so there's no question if the alternator will work or not as with later model alternators used in other kits that have multiple excite designs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003eAlternator power output \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff;\"\u003e\u003cspan style=\"color: #000000;\"\u003eThe stock BEAMS alternator is a 90 amp unit, the JZ alternator used in our kit is a 100 amp. Other kits on the market actually down grade you to an 80 amp unit, you sure you want to do that? Most alternators are not rated to run at peak output, much as injectors or home generators are designed to run at 80% capacity. An 80 amp alternator will only safely output approximately 64 amps if you want it to last, our JZ alternator will function properly at 80 amps. Starting adding up fuel pump, fans, engine controls and lights, you'll have a problem with only 64 amps.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003eWeight savings and construction \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhile our bracket is made from formed and welded steel instead of aluminum, we managed to keep the weight down from a stock of 5.2 lbs. to ours at only 1.4 lbs. Our formed steel design allows us to use the 3 point mounting that Toyota uses for a solid base on the engine allowing us to then build in high torsional strength due to the contoured and welded steel construction. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003eThere are two kits, the Series 1 kit does not have the alternator while the \u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003eSeries 2 kit comes with the 100A alternator.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003eEngine not included!\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003e \u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003eSeries 1 Kit includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNew Bracket\u003c\/p\u003e\n\u003cp\u003eBolting hardware\u003c\/p\u003e\n\u003cp\u003eNew drive belt\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003eSeries 2 Kit includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNew Bracket\u003c\/p\u003e\n\u003cp\u003eBolting hardware\u003c\/p\u003e\n\u003cp\u003eNew drive belt\u003c\/p\u003e\n\u003cp\u003e100A Alternator\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"None","offer_id":66786619425072,"sku":"T-BEAMS-AB","price":192.0,"currency_code":"USD","in_stock":true},{"title":"100 Amp","offer_id":66786619457840,"sku":"T-BEAMS-AB-S2-100-AMP","price":354.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/beams_alternator_bracket_kits1_1.jpg?v=1778848234"},{"product_id":"corolla-celica-front-frame-spacers-1-5-aluminum-with-bolts","title":"Corolla\/Celica Front Frame Spacers, 1.5\" Aluminum with bolts","description":"\u003cp\u003eIf you're doing a motor swap on your E chassis, hood and trans tunnel clearance can become an issue. Installing front frame spacers can help a lot with this problem. We've made these spacers from 1.5\" solid aluminum bar stock so they fit easy and take any load you can dish out. We've also supplied the bolting hardware you'll need to put it all together.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786619326768,"sku":"T-Exx-FFS-S2","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/e_chassis_front_frame_spacers_1.5_aluminum_with_bolts1.jpg?v=1778848234"},{"product_id":"beams-throttle-cable-bracket","title":"Beams Throttle Cable Bracket","description":"\u003cp\u003eIf you want to run a stock intake manifold and throttle body on your BEAMS you'll probably need a way to mount up a throttle cable.\u003c\/p\u003e\n\u003cp\u003eWe've made this bracket to mount easily on the stock manifold and line up a cable to run under the manifold nice and clean.\u003c\/p\u003e\n\u003cp\u003eThe bracket is made from a single piece of formed stainless steel for a simple and clean installation.\u003c\/p\u003e\n\u003cp\u003eIf you're going stand alone computer and won't be using the drive by wire (E-throttle), we also make a throttle lock to make the throttle body full cable drive mechanical. Part number T-TL-S1. \u003c\/p\u003e\n\u003cp\u003eThrottle cable, throttle body and intake manifold not included.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786619392304,"sku":"T-BEAMS-TCB","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/beams_throttle_cable_bracket1.jpg?v=1778848234"},{"product_id":"ae86-seat-mount-brackets","title":"AE86 Seat Mount Brackets","description":"\u003cp\u003eOur front seat mount brackets are designed to fit directly into the Corolla AE86 chassis and make mounting aftermarket seats easy. Our low profile design makes for about the lowest mounts possible.    \u003c\/p\u003e\n\u003cp\u003eWe've given the brackets a 12 3\/4\" mount spacing front to rear that matches most aftermarket seats and sliders along with a wide slotting pattern side to side to allow an adjustment in seat placement relative to the door, center console, seat belt points and roll cages.            \u003c\/p\u003e\n\u003cp\u003eWe've also put a center hole in the bracket for mounting of 5 point harness center submarine belts.\u003c\/p\u003e\n\u003cp\u003eIf you don't think your seat will fit the mounting points we've built in, you can get the seat mount tab kit for extra fitment options.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Left \/ 1 Tab Kit","offer_id":66786619523376,"sku":"T-AE86-FSMB-L, UH-SMB-TK-S1","price":124.0,"currency_code":"USD","in_stock":true},{"title":"Left \/ 2 Tab kits","offer_id":66786619556144,"sku":"T-AE86-FSMB-L, UH-SMB-TK-S1 (2x)","price":133.0,"currency_code":"USD","in_stock":true},{"title":"Left \/ None","offer_id":66786619588912,"sku":"T-AE86-FSMB-L","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Right \/ 1 Tab Kit","offer_id":66786619621680,"sku":"T-AE86-FSMB-R, UH-SMB-TK-S1","price":124.0,"currency_code":"USD","in_stock":true},{"title":"Right \/ 2 Tab kits","offer_id":66786619654448,"sku":"T-AE86-FSMB-R, UH-SMB-TK-S1 (2x)","price":133.0,"currency_code":"USD","in_stock":true},{"title":"Right \/ None","offer_id":66786619687216,"sku":"T-AE86-FSMB-R","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Left + Right \/ 1 Tab Kit","offer_id":66786619719984,"sku":"T-AE86-FSMB-L, T-AE86-FSMB-R, UH-SMB-TK-S1","price":239.0,"currency_code":"USD","in_stock":true},{"title":"Left + Right \/ 2 Tab kits","offer_id":66786619752752,"sku":"T-AE86-FSMB-L, T-AE86-FSMB-R, UH-SMB-TK-S1 (2x)","price":248.0,"currency_code":"USD","in_stock":true},{"title":"Left + Right \/ None","offer_id":66786619785520,"sku":"T-AE86-FSMB-L, T-AE86-FSMB-R","price":230.0,"currency_code":"USD","in_stock":true},{"title":"None \/ 1 Tab Kit","offer_id":66786619818288,"sku":"UH-SMB-TK-S1","price":9.0,"currency_code":"USD","in_stock":true},{"title":"None \/ 2 Tab kits","offer_id":66786619851056,"sku":"UH-SMB-TK-S1 (2x)","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_front_seat_mount_bracket_-_right_side1.jpg?v=1778848234"},{"product_id":"ae86-clutch-pedal-mount-kit-lhd","title":"AE86 Clutch Pedal Mount - Kit - LHD","description":"\u003cp\u003eDon't have a clutch pedal for your 5 speed swap on that AE863 chassis? This is a readily available clutch pedal that's a direct bolt in for the AE86 chassis requiring no modifications to the sheet metal on the car to mount it up, only some trimming on the sound deadening under the dash may be required.\u003c\/p\u003e\n\u003cp\u003eThe AE86 has factory mounting points that we've utilized along with a Toyota Celica ('90 -'93) clutch master for a direct bolt in fitment that in the stock location in the engine bay and sits the pedal nicely in the cab.\u003c\/p\u003e\n\u003cp\u003eThe main bracket is formed 1\/8\" steel while the hanging pedal arm is 1\/4\" steel on a 12mm pivot with a curved pad.\u003c\/p\u003e\n\u003cp\u003eWe've also provided all the bolting hardware for the clutch mount and the master cylinder hook ups.\u003c\/p\u003e\n\u003cp\u003eThis kit includes the clutch master cylinder. If you want to run a Corolla master, we sell the pedal without the master so you can source your own. We also have clutch line kits for W58, R154 and J160 transmissions as well as Nissan swaps\u003c\/p\u003e\n\u003cp\u003ePlease note this pedal is made for LHD USDM cars.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKit Includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMount Base\u003c\/p\u003e\n\u003cp\u003eClutch Pedal\u003c\/p\u003e\n\u003cp\u003eMaster Cylinder\u003c\/p\u003e\n\u003cp\u003eMounting hardware\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786619883824,"sku":"T-AE86-CPM-K","price":223.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/AE86_Clutch_Pedal_Mount_LHD2_56271e4d-3a26-4191-9bd6-be79fca2be0e.jpg?v=1778848234"},{"product_id":"ae86-to-jz-motor-mount-brackets","title":"AE86 to JZ Motor Mount Brackets","description":"\u003cp\u003eOur all new steel mount brackets for JZ engines are designed to take a lot of abuse and hold up over time. If you want a JZ in your Corolla, this is how it's done!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003eFitment\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you're doing a 1J or 2J, these brackets are the ones to use. Later model single turbo 1J's will require the turbo oil drain to be bent forward just a bit to clear the bracket for proper placement on the forward most mounting position that is just slightly higher then the next position just back a spot. while the brackets have slotting allowing about 1\" of adjustment, transmission adapters and transmission cross members will typically dictate the motor position, these brackets allow for the use of transmissions ranging from Nissan to GM and of course Toyota.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003eMaterial and construction\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCNC cut from 1\/4\" steel plate, formed and plated, these engine brackets will handle all the punishment you can throw at them and last a life time doing it. We use a single piece of steel plate that's formed into shape to eliminate welds in transition areas from one plane to another, then we add a gusset for a bit strength. Our design allows for great access to the bolts without a compromise in strength or the potential for cracked welds over time. Our goal isn't one or two years of service, but a lifetime.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003eRubber Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the brackets are designed to fit on stock rubber mounts, due to the weight of the JZ, it's highly recommended to use our urethane AE86 mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese mounts do not fit the TE Chassis.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003eKit includes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1 pair of formed brackets\u003c\/p\u003e\n\u003cp\u003eBlock bolting hardware\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786619490608,"sku":"T-AE86-JZ-MMB","price":127.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_to_jz_motor_mount_brackets1_1.jpg?v=1778848234"},{"product_id":"ae86-upper-radiator-mounts","title":"AE86 Upper Radiator Mounts","description":"\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eXM V.I.P. Radiator mounts\u003c\/span\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e  We call them V.I.P. because they are very important parts. Radiator mounts might seem simple but they play an important roll in the lifespan of the radiator. Don't underestimate why the factory put these little parts in there!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff;\"\u003e\u003cu\u003eMaterial\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003c\/u\u003e  Our upper radiator mounts are made from cast alloy to keep weight and cost down over the expense of billet or fabricated brackets. Why cast? Once we make our mold and since we cast in house, we're able to produce the mounts far more efficiently then billet or hand fabricated. This means we can offer an engineered alloy part at a better price.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff;\"\u003e\u003cu\u003eMore then just a bracket\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003c\/u\u003e  Producing in house also means we can offer a more complete product. We've also made our own mold for the isolator cushion as well. You could go buy expensive brackets somewhere else, but then you'd probably have to cut a piece of radiator hose for a cushion. Is that really the look you're going for? \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff;\"\u003e\u003cu\u003eOptions\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e  We offer our brackets in three powder coated finishes: Silver, Blue and Black Wrinkle. All come with our new yellow Urethane isolators.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Blue","offer_id":66786619916592,"sku":"T-AE86-URM-B","price":71.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":66786619949360,"sku":"T-AE86-URM-S","price":71.0,"currency_code":"USD","in_stock":true},{"title":"Black Wrinkle","offer_id":66786619982128,"sku":"T-AE86-URM-BW","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/upper_radiator_mounts1.jpg?v=1778848234"},{"product_id":"ae86-corolla-dash","title":"AE86 Corolla Dash","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eWe've made these nice aluminum dash mounts in both a blank configuration and pre cut for the Link AIM dash to fit directly into the Toyota AE86 Corolla and mount straight to the factory dash pad\/mount and fit with the factory bezel for a clean install. No cutting, drilling or modifications required!\u003c\/p\u003e\n\u003cp\u003eThe blank dash no accommodations for gauges or dash mounts. This is a DIY dash for you to install your own gauges or dash.\u003c\/p\u003e\n\u003cp\u003eThe AIM dash is pre cut for the Link AIM dash only.\u003c\/p\u003e\n\u003cp\u003eBoth dash mounts are available in black wrinkle powder coat.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cem\u003eThis is for the aluminum dash panel only, this does not come with the Link Dash or factory dash!\u003c\/em\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Blank Dash \/ Natural","offer_id":66786620014896,"sku":"L-DM-AE86-B","price":123.0,"currency_code":"USD","in_stock":true},{"title":"Blank Dash \/ Black Texture Powder Coat","offer_id":66786620047664,"sku":"L-DM-AE86-B-BK","price":151.0,"currency_code":"USD","in_stock":true},{"title":"MXS Dash \/ Natural","offer_id":66786620080432,"sku":"L-DM-AE86-MXS-B","price":128.0,"currency_code":"USD","in_stock":true},{"title":"MXS Dash \/ Black Texture Powder Coat","offer_id":66786620113200,"sku":"L-DM-AE86-MXS-BK","price":156.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_corolla_-_link_mxs_5_1__1.jpg?v=1778848234"},{"product_id":"ae86-drivelines","title":"AE86 Drivelines","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eIf you're doing an engine or transmission swap in your AE86, you'll need a good driveline. We've got several options to chose from.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eGeneral fitment\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e The fitment of our drivelines is based on our swap motor brackets and cross members and in some cases, transmission adapters. \u003cspan style=\"color: #ff0000;\"\u003eThe standard fitment is based on the stock sAE86 solid axle. \u003cem\u003eThis driveline will be to long for truck axle swaps! We can build a driveline to suit your needs, just contact us for dimensional requirements. Some truck axles also have different drive flanges and require us to use the appropriate part on the driveline.\u003c\/em\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eSupported transmissions\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWhile many transmissions are \"similar\" in fitment, we build each driveline for it's specific application. If you don't see your application, just give us a shout to see what we can do for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eNon-Spec Drivelines\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eAll drivelines are made in house, so we can typically accommodate most shafts to suit your needs. If you've done you're own motor mounts, are using a different gearbox such as a G-Force dog box or have done an axle swap, just send us an email or give us a call and we can get the details worked out.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eDifferential Flange Bolts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWhile you may get away with your old bolts, we've put together a kit with all new APR chromoly 12 point flange head bolts with flanged nylock nuts. If you don't want to worry about your bolts, add these to the order! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e 8mm bolts are typical to stock Corolla SR5 and GTS axles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e10mm bolts are typical to Supra and most truck axle swaps.   \u003c\/span\u003eDue to differences in differential flanges that use 10mm bolts, these are a longer bolt that may not always be required. The extra length is not typically a problem. We do provide washers to use when required. It is not common to need to cut the bolts shorter as most differentials have plenty of clearance behind the flange.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eConstruction\u003c\/span\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWe make all of our drivelines from new 3\" x .083 DOM steel. We've found steel to handle the most abuse and last the longest but we can also make aluminum shafts, just inquire for cost. All shafts are hydraulically pressed together in phase, rotationally welded then straightened before spin balancing. The universal joints are size 1310 and the slip yolk and rear flanges are sized to match, no stepped down conversion universal joints. All components are new, never sourced from old drivelines.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e Please allow 5-7 days to complete a driveshaft to ship out.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"4AG \/ T50 \/ SR5 - No Bolts","offer_id":66786620145968,"sku":"T-AE86-4AG-T50-SR5-DL","price":495.0,"currency_code":"USD","in_stock":true},{"title":"4AG \/ T50 \/ SR5 - 8mm Diff Bolts","offer_id":66786620178736,"sku":"T-AE86-4AG-T50-SR5-DL, UH-DLBK-8M","price":529.0,"currency_code":"USD","in_stock":true},{"title":"4AG \/ T50 \/ GTS - No Bolts","offer_id":66786620211504,"sku":"T-AE86-4AG-T50-GTS-DL","price":495.0,"currency_code":"USD","in_stock":true},{"title":"4AG \/ T50 \/ GTS - 8mm Diff Bolts","offer_id":66786620244272,"sku":"T-AE86-4AG-T50-GTS-DL, UH-DLBK-8M","price":529.0,"currency_code":"USD","in_stock":true},{"title":"4AG \/ T50 \/ 10mm Bolts","offer_id":66786620277040,"sku":"T-AE86-4AG-T50-DL, UH-DLBK-10M","price":534.0,"currency_code":"USD","in_stock":true},{"title":"BEAMS \/ J160 - (BEAMS) \/ SR5 - No Bolts","offer_id":66786620309808,"sku":"T-AE86-BEAMS-SR5-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"BEAMS \/ J160 - (BEAMS) \/ SR5 - 8mm Diff Bolts","offer_id":66786620342576,"sku":"T-AE86-BEAMS-SR5-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"BEAMS \/ J160 - (BEAMS) \/ GTS - No Bolts","offer_id":66786620375344,"sku":"T-AE86-BEAMS-GTS-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"BEAMS \/ J160 - (BEAMS) \/ GTS - 8mm Diff Bolts","offer_id":66786620408112,"sku":"T-AE86-BEAMS-GTS-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"BEAMS \/ J160 - (BEAMS) \/ 10mm Bolts","offer_id":66786620440880,"sku":"T-AE86-BEAMS-DL, UH-DLBK-10M","price":574.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ W58 \/ SR5 - No Bolts","offer_id":66786620473648,"sku":"T-AE86-1UZ-W58-SR5-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ W58 \/ SR5 - 8mm Diff Bolts","offer_id":66786620506416,"sku":"T-AE86-1UZ-W58-SR5-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ W58 \/ GTS - No Bolts","offer_id":66786620539184,"sku":"T-AE86-1UZ-W58-GTS-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ W58 \/ GTS - 8mm Diff Bolts","offer_id":66786620571952,"sku":"T-AE86-1UZ-W58-GTS-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ W58 \/ 10mm Bolts","offer_id":66786620604720,"sku":"T-AE86-1UZ-W58-DL, UH-DLBK-10M","price":574.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ R154 \/ SR5 - No Bolts","offer_id":66786620637488,"sku":"T-AE86-1UZ-R154-SR5-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ R154 \/ SR5 - 8mm Diff Bolts","offer_id":66786620670256,"sku":"T-AE86-1UZ-R154-SR5-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ R154 \/ GTS - No Bolts","offer_id":66786620703024,"sku":"T-AE86-1UZ-R154-GTS-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ R154 \/ GTS - 8mm Diff Bolts","offer_id":66786620735792,"sku":"T-AE86-1UZ-R154-GTS-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ R154 \/ 10mm Bolts","offer_id":66786620768560,"sku":"T-AE86-1UZ-R154-DL, UH-DLBK-10M","price":574.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ TL70 \/ SR5 - No Bolts","offer_id":66786620801328,"sku":"T-AE86-1UZ-TL70-SR5-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ TL70 \/ SR5 - 8mm Diff Bolts","offer_id":66786620834096,"sku":"T-AE86-1UZ-TL70-SR5-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ TL70 \/ GTS - No Bolts","offer_id":66786620866864,"sku":"T-AE86-1UZ-TL70-GTS-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ TL70 \/ GTS - 8mm Diff Bolts","offer_id":66786620899632,"sku":"T-AE86-1UZ-TL70-GTS-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"1UZ \/ TL70 \/ 10mm Bolts","offer_id":66786620932400,"sku":"T-AE86-1UZ-TL70-DL, UH-DLBK-10M","price":574.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ W58 \/ SR5 - No Bolts","offer_id":66786620965168,"sku":"T-AE86-JZ-W58-SR5-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ W58 \/ SR5 - 8mm Diff Bolts","offer_id":66786620997936,"sku":"T-AE86-JZ-W58-SR5-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ W58 \/ GTS - No Bolts","offer_id":66786621030704,"sku":"T-AE86-JZ-W58-GTS-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ W58 \/ GTS - 8mm Diff Bolts","offer_id":66786621063472,"sku":"T-AE86-JZ-W58-GTS-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ W58 \/ 10mm Bolts","offer_id":66786621096240,"sku":"T-AE86-JZ-W58-DL, UH-DLBK-10M","price":574.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ R154 \/ SR5 - No Bolts","offer_id":66786621129008,"sku":"T-AE86-JZ-R154-SR5-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ R154 \/ SR5 - 8mm Diff Bolts","offer_id":66786621161776,"sku":"T-AE86-JZ-R154-SR5-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ R154 \/ GTS - No Bolts","offer_id":66786621194544,"sku":"T-AE86-JZ-R154-GTS-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ R154 \/ GTS - 8mm Diff Bolts","offer_id":66786621227312,"sku":"T-AE86-JZ-R154-GTS-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ R154 \/ 10mm Bolts","offer_id":66786621260080,"sku":"T-AE86-JZ-R154-DL, UH-DLBK-10M","price":574.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ J160 - (BEAMS) \/ 10mm Bolts","offer_id":66786621292848,"sku":"T-AE86-4AG-W58-DL-90","price":574.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ TL70 \/ SR5 - No Bolts","offer_id":66786621325616,"sku":"T-AE86-JZ-TL70-SR5-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ TL70 \/ SR5 - 8mm Diff Bolts","offer_id":66786621358384,"sku":"T-AE86-JZ-TL70-SR5-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ TL70 \/ GTS - No Bolts","offer_id":66786621391152,"sku":"T-AE86-JZ-TL70-GTS-DL","price":535.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ TL70 \/ GTS - 8mm Diff Bolts","offer_id":66786621423920,"sku":"T-AE86-JZ-TL70-GTS-DL, UH-DLBK-8M","price":566.0,"currency_code":"USD","in_stock":true},{"title":"JZ \/ TL70 \/ 10mm Bolts","offer_id":66786621456688,"sku":"T-AE86-JZ-TL70-DL, UH-DLBK-10M","price":574.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_drivelines.jpg?v=1778848235"},{"product_id":"corolla-celica-axle-brackets-2-5-2-6","title":"Corolla\/Celica Axle Brackets - 2.5\/2.6\"","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eIf you're looking to do an axle swap in your E chassis or put an E type multilink axle under a different car, you'll want these axle brackets to do the job. If you're thinking about cutting off a set of stock brackets and re-using them, you can be in for a fair bit of work. When you get them cut off, the brackets are old, rusty, cut up and no longer match the shape of the axle tubes and often times have suspension mounting holes that are no longer round and you will still need to buy geometry correction brackets for lowered cars or more traction.\u003c\/p\u003e\n\u003cp\u003eOur all new brackets are CNC cut from 1\/8\" (3mm) steel then formed to work with stock type suspension components. We've also made them with multiple geometry correction points already built in so you won't need to buy any bolt on correction brackets as well. We've also maintained the stock mounting points to keep the hardware legal for sanctioning bodies that require stock mounting geometry.\u003c\/p\u003e\n\u003cp\u003eWe leave the brackets with all the material on all sides intact. We believe these are not parts that should be \"lightened out\" or have logos cut into them reducing strength.\u003c\/p\u003e\n\u003cp\u003eIt should be noted that these brackets are designed for AE\/TE chassis and the geometry is correct accordingly. IF YOU'RE SWAPPING TO A DIFFERENT CHASSIS, LIKE A CELICA, YOU MAY NEED TO ADJUST FITMENT. Not all Celica's use the same body mount points or arms, so not all swap situations are the same.\u003c\/p\u003e\n\u003cp\u003eWe offer the lower shock mounts in two versions, relocated inward for more tire clearance that with some True Type coils may not fit such as Fortune Auto (inverted spring). Other brands such as BC Racing and Stance work without issue (top spring). We also offer the Offset shock position that is the same as OEM placement if you have concerns with True Type coil overs or other fitment.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Inboard Lower Mounts - Pair \/ None \/ None","offer_id":66786621489456,"sku":"T-Exx-AB-LM-26","price":98.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ None \/ Axle - Sway Bar Pad - Pair","offer_id":66786621522224,"sku":"T-Exx-AB-LM-26, T-Exx-26-SBP","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ None \/ Axle Spring Pad set","offer_id":66786621554992,"sku":"T-Exx-AB-LM-26, T-Exx-26-SP","price":236.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ None \/ Sway Bar Pads + Spring Pads","offer_id":66786621587760,"sku":"T-EXX-AB-LM-26, T-EXX-26-SBP, T-EXX-26-SP","price":273.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper Mounts - Pair \/ None","offer_id":66786621620528,"sku":"T-EXX-AB-LM-26, T-EXX-UM-26","price":155.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper Mounts - Pair \/ Axle - Sway Bar Pad - Pair","offer_id":66786621653296,"sku":"T-EXX-AB-LM-26, T-EXX-UM-26, T-EXX-26-SBP","price":192.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper Mounts - Pair \/ Axle Spring Pad set","offer_id":66786621686064,"sku":"T-EXX-AB-LM-26, T-EXX-UM-26, T-EXX-26-SP","price":293.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper Mounts - Pair \/ Sway Bar Pads + Spring Pads","offer_id":66786621718832,"sku":"T-EXX-AB-LM-26, T-EXX-UM-26, T-EXX-26-SBP, T-EXX-26-SP","price":330.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Panhard Mount \/ None","offer_id":66786621751600,"sku":"T-EXX-AB-LM-26, T-EXX-PM-26","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Panhard Mount \/ Axle - Sway Bar Pad - Pair","offer_id":66786621784368,"sku":"T-EXX-AB-LM-26, T-EXX-PM-26, T-EXX-26-SBP","price":182.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Panhard Mount \/ Axle Spring Pad set","offer_id":66786621817136,"sku":"T-EXX-AB-LM-26, T-EXX-PM-26, T-EXX-26-SP","price":283.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Panhard Mount \/ Sway Bar Pads + Spring Pads","offer_id":66786621849904,"sku":"T-EXX-AB-LM-26, T-EXX-PM-26, T-EXX-26-SBP, T-EXX-26-SP","price":320.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper + Panhard \/ None","offer_id":66786621882672,"sku":"T-EXX-AB-LM-26, T-EXX-UM-26, T-EXX-PM-26","price":202.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper + Panhard \/ Axle - Sway Bar Pad - Pair","offer_id":66786621915440,"sku":"T-EXX-AB-LM-26, T-EXX-UM-26, T-EXX-PM-26, T-EXX-26-SBP","price":239.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper + Panhard \/ Axle Spring Pad set","offer_id":66786621948208,"sku":"T-EXX-AB-LM-26, T-EXX-UM-26, T-EXX-PM-26, T-EXX-26-SP","price":340.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper + Panhard \/ Sway Bar Pads + Spring Pads","offer_id":66786621980976,"sku":"T-EXX-AB-LM-26, T-EXX-UM-26, T-EXX-PM-26, T-EXX-26-SBP, T-EXX-26-SP","price":377.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ None \/ None","offer_id":66786622013744,"sku":"T-EXX-AB-LM-O-26","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ None \/ Axle - Sway Bar Pad - Pair","offer_id":66786622046512,"sku":"T-EXX-AB-LM-O-26, T-EXX-26-SBP","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ None \/ Axle Spring Pad set","offer_id":66786622079280,"sku":"T-EXX-AB-LM-O-26, T-EXX-26-SP","price":246.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ None \/ Sway Bar Pads + Spring Pads","offer_id":66786622112048,"sku":"T-EXX-AB-LM-O-26, T-EXX-26-SBP, T-EXX-26-SP","price":283.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper Mounts - Pair \/ None","offer_id":66786622144816,"sku":"T-EXX-AB-LM-O-26, T-EXX-UM-26","price":165.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper Mounts - Pair \/ Axle - Sway Bar Pad - Pair","offer_id":66786622177584,"sku":"T-EXX-AB-LM-O-26, T-EXX-UM-26, T-EXX-26-SBP","price":202.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper Mounts - Pair \/ Axle Spring Pad set","offer_id":66786622210352,"sku":"T-EXX-AB-LM-O-26, T-EXX-UM-26, T-EXX-26-SP","price":303.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper Mounts - Pair \/ Sway Bar Pads + Spring Pads","offer_id":66786622243120,"sku":"T-EXX-AB-LM-O-26, T-EXX-UM-26, T-EXX-26-SBP, T-EXX-26-SP","price":340.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Panhard Mount \/ None","offer_id":66786622275888,"sku":"T-EXX-AB-LM-O-26, T-EXX-PM-26","price":155.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Panhard Mount \/ Axle - Sway Bar Pad - Pair","offer_id":66786622308656,"sku":"T-EXX-AB-LM-O-26, T-EXX-PM-26, T-EXX-26-SBP","price":192.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Panhard Mount \/ Axle Spring Pad set","offer_id":66786622341424,"sku":"T-EXX-AB-LM-O-26, T-EXX-PM-26, T-EXX-26-SP","price":293.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Panhard Mount \/ Sway Bar Pads + Spring Pads","offer_id":66786622374192,"sku":"T-EXX-AB-LM-O-26, T-EXX-PM-26, T-EXX-26-SBP, T-EXX-26-SP","price":330.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper + Panhard \/ None","offer_id":66786622406960,"sku":"T-EXX-AB-LM-O-26, T-EXX-UM-26, T-EXX-PM-26","price":212.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper + Panhard \/ Axle - Sway Bar Pad - Pair","offer_id":66786622439728,"sku":"T-EXX-AB-LM-O-26, T-EXX-UM-26, T-EXX-PM-26, T-EXX-26-SBP","price":249.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper + Panhard \/ Axle Spring Pad set","offer_id":66786622472496,"sku":"T-EXX-AB-LM-O-26, T-EXX-UM-26, T-EXX-PM-26, T-EXX-26-SP","price":350.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper + Panhard \/ Sway Bar Pads + Spring Pads","offer_id":66786622505264,"sku":"T-EXX-AB-LM-O-26, T-EXX-UM-26, T-EXX-PM-26, T-EXX-26-SBP, T-EXX-26-SP","price":387.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/e_chassis_axel_brackets_1.jpg?v=1778848241"},{"product_id":"ae86-front-suspension-emerald","title":"AE86 Front Suspension - Emerald","description":"\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"html\"\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eFront Lower Arms\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur all new front control arm design is a fixed 25mm extended and features a fully boxed arm made from only 4 welded components, the Spherical mount, two main beam halves and the lower ball joint nose section. By keeping components to a minimum and maximizing formed metal, we've reduced welding, increased strength and can deliver an extremely strong arm without the higher cost that comes from lot of welding.\u003c\/p\u003e\n\u003cp\u003eAll lot of manufacturers tout \"TIG\" welding as the only way to fabricate, but we find they usually have poor engineering with welds on every corner. You can use the \"Best\" process, but it doesn't compensate for bad designs. By moving the welds away from the high stress corners, we increase strength and dramatically increase the arms ability to take impacts with no worry if a corner weld splitting. Fabricating our way also significantly reduces heat in the material from extensive welding which causes it's own material stress and distortion. If you fold a cardboard box and tape the top and bottom shut right down the middle, it's quite a strong box, now cut the sides off and tape those back together. Which box do you want, the one with the formed sides or the one with taped sides?\u003c\/p\u003e\n\u003cp\u003eWe've used a replaceable Teflon lined spherical bearing for the chassis mounting point instead of a bushing, this is intended to keep deflection down and allow for good articulation of Caster. Typically when you pull arms forward to increase Caster, the inner rubber or Poly bushing will pinch on the corners and cause premature wear and possible failure. We've also used Stainless Steel spacers on the spherical to pass the main bolt through. This is not the place to use softer aluminum that can deform over time from the impacts front wheels can see. The stainless also ensures that any water and grime won't rust up the bolt, making it hard to service.\u003c\/p\u003e\n\u003cp\u003eThe outer ball joint is a factory type unit, they have greater articulation angles then heims and are sealed and greased. If you've ever had a factory car go 100K+ miles on a stock ball joint, you'll understand the benefits of using them, not to mention they're readily available at any auto parts store.\u003c\/p\u003e\n\u003cp\u003eThe 25mm extended length has become a commonly know standard, while we had made arms with the ability for more width, we found that we always came back to 25mm and wished we just has simple solid arm with long life components, so that's what we've made.\u003c\/p\u003e\n\u003cp\u003eThe arms can use any tension rod that mounts up to the factory lower control arm mounting points, such as our single rod OEM style adjustable tension rods. You can get plenty of Caster adjustment while maintaining an ultra simple design that has extremely low component wear and failure rate.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eFront Tension Rod Mounts\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThere is a lot of fabrication engineering packed into these simple brackets. Increasing strength, maintaining all factory mount locations and types as well as upgrades like an optional Spherical Tension rod mount that works with OEM type tension rods.\u003c\/p\u003e\n\u003cp\u003eYou can put a lot of effort and cost into improving all the components on the front end, but if you leave the stock lightweight mounting points, are you getting the most out of your upgrades? We've been making the best front crossmembers for years, it's time to upgrade the tension rod mounts.\u003c\/p\u003e\n\u003cp\u003eMade from .105\"(2.65mm)steel, we've not only beefed up the material thickness, but streamlined the design while adding double plated on mounting points. The stock brackets were never designed for the higher loads, bigger high offset wheels, more aggressive braking and definitely not full lock impacts or increased body torsional loads.\u003c\/p\u003e\n\u003cp\u003eThese front mounts will only work with OEM threaded rod type Tension rods like our XM adjustable mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eFront Tension rods\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe've designed these front tension rods with simplicity in mind, no fancy parts that cost more money to do a simple job, just tough and functional. The Corolla factory design has some good qualities, if you can keep them to your advantage. A lot of companies that make Heim style tension rods don't factor in that they shorten the swing radius of the tension rod. This increases Caster deviation throughout the range of motion. Did you want to increase the amount of Caster variability?\u003c\/p\u003e\n\u003cp\u003eIf you want a more solid front mounting arrangement then the stock rubber or our Polyurethane units, we also offer all new Tension Rod Mounts with built in Spherical bearings.\u003c\/p\u003e\n\u003cp\u003eMade from 16mm steel bar with a heavy welded control arm mounting point, we've delivered some necessary features in a simple design. Who knows, maybe The engineers at Toyota were actually pretty smart?\u003c\/p\u003e\n\u003cp\u003eWith the front section fully threaded, all the Caster adjustment is done up front with just two nuts, just like factory. This has allowed us to keep the center section slimmer and cleaner so your tires and rims don't tag an adjuster sleeve causing damage and running the risk of jarring things loose. This design has also allowed us to offset the rod section through the middle to gain approximately 5\/8\" more tire clearance over stock arms and up to 1\" more than center adjust styles tension rods allowing for more steering angle before the tire hits the tension rod.\u003c\/p\u003e\n\u003cp\u003eSomething else people are not usually concerned with but is good to keep in mind, since drifting doesn't always go as planned, these arms are fixable. With the simple design and lack of exotic parts, you can straighten, re-weld and re-use these if they get damaged. You can also call us if you need to replace just one, we manufacture in house and can deliver on single side replacements!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eFront Tension rod Bushings\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTension rod bushings are such a simple part and play an important part in the overall handling of the front end. Those no question that factory rubber bushings are fine for street use, if they're not cracked from age. Polyurethane is the easy way to tighten up the Tension rod and add accuracy to the steering without sacrificing ride and NVH absorption.\u003c\/p\u003e\n\u003cp\u003eOur poly bushing kit is designed to work on will factory style fitment tension rods, such as our aftermarket tension rods. The 80A durometer is nice upgrade from stock rubber without being harsh, making them a good medium between stock and competition. The polyurethane also has a high life expectancy, greater than the factory rubber.\u003c\/p\u003e\n\u003cp\u003eWe've also included new washers to make the whole package a clean install.\u003c\/p\u003e\n\u003cp\u003eAll of our Poly bushings are manufactured in America at an ISO9001 certified facility using our own molds. We don't sell other manufacturers products with our name on it and we don't wait for \"containers\" to come in with our products.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eFront Mounts, Tension rods and bushings are sold as independent pairs. IE, Front Mounts do NOT come with tension rods and bushings. They must be selected independently for purchase.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Front Lower Arms \/ None \/ None","offer_id":66786622538032,"sku":"T-AE86-FLCA-E","price":335.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ None \/ Tension Rods + Bushings","offer_id":66786622570800,"sku":"T-AE86-FLCA-E, T-AE86-FTR-E, T-FTRB","price":500.5,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ None \/ Tension Rods Only","offer_id":66786622603568,"sku":"T-AE86-FLCA-E, T-AE86-FTR-E","price":463.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ None \/ Tension Rod Bushings Only","offer_id":66786622636336,"sku":"T-AE86-FLCA-E, T-FTRB","price":372.5,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Bushing Type \/ None","offer_id":66786622669104,"sku":"T-AE86-FLCA-E, T-AE86-FTRM-E-OEM","price":670.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Bushing Type \/ Tension Rods + Bushings","offer_id":66786622701872,"sku":"T-AE86-FLCA-E, T-AE86-FTRM-E-OEM, T-AE86-FTR-E, T-FTRB","price":835.5,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Bushing Type \/ Tension Rods Only","offer_id":66786622734640,"sku":"T-AE86-FLCA-E, T-AE86-FTRM-E-OEM, T-AE86-FTR-E","price":798.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Bushing Type \/ Tension Rod Bushings Only","offer_id":66786622767408,"sku":"T-AE86-FLCA-E, T-AE86-FTRM-E-OEM, T-AE86-FTRB","price":707.5,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Spherical \/ None","offer_id":66786622800176,"sku":"T-AE86-FLCA-E, T-AE86-FTRM-E-SP","price":707.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Spherical \/ Tension Rods + Bushings","offer_id":66786622832944,"sku":"T-AE86-FLCA-E, T-AE86-FTRM-E-SP, T-AE86-FTR-E, T-FTRB","price":872.5,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Spherical \/ Tension Rods Only","offer_id":66786622865712,"sku":"T-AE86-FLCA-E, T-AE86-FTRM-E-SP, T-AE86-FTR-E","price":835.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Spherical \/ Tension Rod Bushings Only","offer_id":66786622898480,"sku":"T-AE86-FLCA-E, T-AE86-FTRM-E-SP, T-FTRB","price":744.5,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Tension Rods + Bushings","offer_id":66786622931248,"sku":"T-AE86-FTR-E, T-FTRB","price":165.5,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Tension Rods Only","offer_id":66786622964016,"sku":"T-AE86-FTR-E","price":128.0,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Tension Rod Bushings Only","offer_id":66786622996784,"sku":"T-FTRB","price":37.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Bushing Type \/ None","offer_id":66786623029552,"sku":"T-AE86-FTRM-E-OEM","price":335.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Bushing Type \/ Tension Rods + Bushings","offer_id":66786623062320,"sku":"T-AE86-FTRM-E-OEM, T-AE86-FTR-E, T-FTRB","price":499.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Bushing Type \/ Tension Rods Only","offer_id":66786623095088,"sku":"T-AE86-FTRM-E-OEM, T-AE86-FTR-E","price":462.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Bushing Type \/ Tension Rod Bushings Only","offer_id":66786623127856,"sku":"T-AE86-FTRM-E-OEM, T-FTRB","price":372.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Spherical \/ None","offer_id":66786623160624,"sku":"T-AE86-FTRM-E-SP","price":372.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Spherical \/ Tension Rods + Bushings","offer_id":66786623193392,"sku":"T-AE86-FTRM-E-SP, T-AE86-FTR-E","price":537.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Spherical \/ Tension Rods Only","offer_id":66786623226160,"sku":"T-AE86-FTRM-E-SP, T-AE86-FTR-E","price":500.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Spherical \/ Tension Rod Bushings Only","offer_id":66786623258928,"sku":"T-AE86-FTRM-E-SP, T-FTRB","price":409.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/AE_Front_Suspension_3_ec56be24-f634-42a0-9858-5769db7c887e.jpg?v=1778848242"},{"product_id":"ae86-parking-brake-cable-mount-tabs","title":"AE86 Parking Brake Cable Mount Tabs","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eIf you're swapping rear axles or just rebuilding a stock one with factory AE rear brakes, you may need a set of the mounting brackets for the parking brake cable.\u003c\/p\u003e\n\u003cp\u003eOur all new brackets are formed from a single piece of steel, just like factory, no welds or extensive machining.\u003c\/p\u003e\n\u003cp\u003eThe new brackets are designed to fit just like factory and properly mount and align the factory parking brake cable.\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786623291696,"sku":"T-AE86-PB-MT","price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_parking_brake_cable_mount_tabs1.jpg?v=1778848242"},{"product_id":"ae86-front-tension-rod-mounts-bushing-emerald","title":"AE86 Front Tension Rod Mounts - Bushing - Emerald","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eThere is a lot of fabrication engineering packed into these simple brackets. Increasing strength, maintaining all factory mount locations and types as well as upgrades like an optional Spherical Tension rod mount that works with OEM type tension rods.\u003c\/p\u003e\n\u003cp\u003eYou can put a lot of effort and cost into improving all the components on the front end, but if you leave the stock lightweight mounting points, are you getting the most out of your upgrades? We've been making the best front crossmembers for years, it's time to upgrade the tension rod mounts.\u003c\/p\u003e\n\u003cp\u003eMade from .105\"(2.65mm)steel, we've not only beefed up the material thickness, but streamlined the design while adding double plated on mounting points. The stock brackets were never designed for the higher loads, bigger high offset wheels, more aggressive braking and definitely not full lock impacts or increased body torsional loads.\u003c\/p\u003e\n\u003cp\u003eThese front mounts will only work with OEM threaded rod type Tension rods like our XM adjustable mounts.\u003c\/p\u003e\n\u003cp\u003eOffered in powder coat Metallic Emerald or powder coat Chrome.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eBolts directly to stock mounting points.\u003c\/p\u003e\n\u003cp\u003eUpgrades tension rod mount point to Spherical without adapters\u003c\/p\u003e\n\u003cp\u003eSold in pairs.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786623324464,"sku":"T-AE86-FTRM-B-E","price":335.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae_front_suspension5_1.jpg?v=1778848242"},{"product_id":"ae86-tension-rods-chrome","title":"AE86 Tension Rods - Chrome","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eWe've designed these front tension rods with simplicity in mind, no fancy parts that cost more money to do a simple job, just tough and functional. The Corolla factory design has some good qualities, if you can keep them to your advantage. A lot of companies that make Heim style tension rods don't factor in that they shorten the swing radius of the tension rod. This increases Caster deviation throughout the range of motion. Did you want to increase the amount of Caster variability?\u003c\/p\u003e\n\u003cp\u003eIf you want a more solid front mounting arrangement then the stock rubber or our Polyurethane units, we also offer all new Tension Rod Mounts with built in Spherical bearings.\u003c\/p\u003e\n\u003cp\u003eMade from 16mm steel bar with a heavy welded control arm mounting point, we've delivered some necessary features in a simple design. Who knows, maybe The engineers at Toyota were actually pretty smart?\u003c\/p\u003e\n\u003cp\u003eWith the front section fully threaded, all the Caster adjustment is done up front with just two nuts, just like factory. This has allowed us to keep the center section slimmer and cleaner so your tires and rims don't tag an adjuster sleeve causing damage and running the risk of jarring things loose. This design has also allowed us to offset the rod section through the middle to gain approximately 5\/8\" more tire clearance over stock arms and up to 1\" more than center adjust styles tension rods allowing for more steering angle before the tire hits the tension rod.\u003c\/p\u003e\n\u003cp\u003eSomething else people are not usually concerned with but is good to keep in mind, since drifting doesn't always go as planned, these arms are fixable. With the simple design and lack of exotic parts, you can straighten, re-weld and re-use these if they get damaged. You can also call us if you need to replace just one, we manufacture in house and can deliver on single side replacements!\u003c\/p\u003e\n\u003cp\u003eOffered in powder coat Metallic Emerald or powder coat Chrome.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eBolts directly to stock control arms and front bushings.\u003c\/p\u003e\n\u003cp\u003eAlso works with Xcessive Front Tension rod Mounts with upgraded Sphericals.\u003c\/p\u003e\n\u003cp\u003eIncreases max capacity of steering\u003c\/p\u003e\n\u003cp\u003eSold in pairs, with all required hardware.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786623357232,"sku":"T-AE86-FTR-C","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae_front_suspension_9__1.jpg?v=1778848242"},{"product_id":"ae86-clutch-pedal-mount-lhd-1","title":"AE86 Clutch Pedal Mount - LHD","description":"\u003cp\u003eDon't have a clutch pedal for your 5 speed swap on that AE86 chassis? This is a readily available clutch pedal that's a direct bolt in for the AE86 chassis requiring no modifications to the sheet metal on the car to mount it up, only some trimming on the sound deadening under the dash may be required.\u003c\/p\u003e\n\u003cp\u003eThe AE86 has factory mounting points that we've utilized along with a Toyota Celica ('90 -'93) clutch master for a direct bolt in fitment that in the stock location in the engine bay and sits the pedal nicely in the cab.\u003c\/p\u003e\n\u003cp\u003eThe main bracket is formed 1\/8\" steel while the hanging pedal arm is 1\/4\" steel on a 12mm pivot with a curved pad.\u003c\/p\u003e\n\u003cp\u003ePlease note this pedal is made for LHD USDM cars.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKit Includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMount Base\u003c\/p\u003e\n\u003cp\u003eClutch Pedal\u003c\/p\u003e\n\u003cp\u003eMounting hardware\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786623390000,"sku":"T-AE86-CPM-K","price":223.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/AE86_Clutch_Pedal_Mount_LHD1_4538f859-5ff4-424f-b6a3-58aa53d1639f.jpg?v=1778848244"},{"product_id":"ae86-front-tension-rod-mounts-bushing-chrome","title":"AE86 Front Tension Rod Mounts - Bushing - Chrome","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eThere is a lot of fabrication engineering packed into these simple brackets. Increasing strength, maintaining all factory mount locations and types as well as upgrades like an optional Spherical Tension rod mount that works with OEM type tension rods.\u003c\/p\u003e\n\u003cp\u003eYou can put a lot of effort and cost into improving all the components on the front end, but if you leave the stock lightweight mounting points, are you getting the most out of your upgrades? We've been making the best front crossmembers for years, it's time to upgrade the tension rod mounts.\u003c\/p\u003e\n\u003cp\u003eMade from .105\"(2.65mm)steel, we've not only beefed up the material thickness, but streamlined the design while adding double plated on mounting points. The stock brackets were never designed for the higher loads, bigger high offset wheels, more aggressive braking and definitely not full lock impacts or increased body torsional loads.\u003c\/p\u003e\n\u003cp\u003eThese front mounts will only work with OEM threaded rod type Tension rods like our XM adjustable mounts.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eOffered in powder coat Metallic Emerald or powder coat Chrome.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eBolts directly to stock mounting points.\u003c\/p\u003e\n\u003cp\u003eUpgrades tension rod mount point to Spherical without adapters\u003c\/p\u003e\n\u003cp\u003eSold in pairs.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786623422768,"sku":"T-AE86-FTRM-B-C","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae_front_suspension1_3.jpg?v=1778848246"},{"product_id":"ae86-tension-rod-bushings","title":"AE86 Tension Rod Bushings","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eTension rod bushings are such a simple part and play an important part in the overall handling of the front end. Those no question that factory rubber bushings are fine for street use, if they're not cracked from age. Polyurethane is the easy way to tighten up the Tension rod and add accuracy to the steering without sacrificing ride and NVH absorption.\u003c\/p\u003e\n\u003cp\u003eOur poly bushing kit is designed to work on will factory style fitment tension rods, such as our aftermarket tension rods. The 80A durometer is nice upgrade from stock rubber without being harsh, making them a good medium between stock and competition. The polyurethane also has a high life expectancy, greater than the factory rubber.\u003c\/p\u003e\n\u003cp\u003eWe've also included new washers to make the whole package a clean install.\u003c\/p\u003e\n\u003cp\u003eAll of our Poly bushings are manufactured in America at an ISO9001 certified facility using our own molds. We don't sell other manufacturers products with our name on it and we don't wait for \"containers\" to come in with our products. \u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eFits directly into stock location.\u003c\/p\u003e\n\u003cp\u003eFirms up front suspension.\u003c\/p\u003e\n\u003cp\u003eSold in pairs, with new formed washers.\u003c\/p\u003e\n\n\u003cp\u003eTension rods not included.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786623455536,"sku":"T-AE86-FTRB","price":37.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/tension_rod_bushings1.jpg?v=1778848246"},{"product_id":"ae86-tension-rods-emerald","title":"AE86 Tension Rods - Emerald","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eWe've designed these front tension rods with simplicity in mind, no fancy parts that cost more money to do a simple job, just tough and functional. The Corolla factory design has some good qualities, if you can keep them to your advantage. A lot of companies that make Heim style tension rods don't factor in that they shorten the swing radius of the tension rod. This increases Caster deviation throughout the range of motion. Did you want to increase the amount of Caster variability?\u003c\/p\u003e\n\u003cp\u003eIf you want a more solid front mounting arrangement then the stock rubber or our Polyurethane units, we also offer all new Tension Rod Mounts with built in Spherical bearings.\u003c\/p\u003e\n\u003cp\u003eMade from 16mm steel bar with a heavy welded control arm mounting point, we've delivered some necessary features in a simple design. Who knows, maybe The engineers at Toyota were actually pretty smart?\u003c\/p\u003e\n\u003cp\u003eWith the front section fully threaded, all the Caster adjustment is done up front with just two nuts, just like factory. This has allowed us to keep the center section slimmer and cleaner so your tires and rims don't tag an adjuster sleeve causing damage and running the risk of jarring things loose. This design has also allowed us to offset the rod section through the middle to gain approximately 5\/8\" more tire clearance over stock arms and up to 1\" more than center adjust styles tension rods allowing for more steering angle before the tire hits the tension rod.\u003c\/p\u003e\n\u003cp\u003eSomething else people are not usually concerned with but is good to keep in mind, since drifting doesn't always go as planned, these arms are fixable. With the simple design and lack of exotic parts, you can straighten, re-weld and re-use these if they get damaged. You can also call us if you need to replace just one, we manufacture in house and can deliver on single side replacements!\u003c\/p\u003e\n\u003cp\u003eOffered in powder coat Metallic Emerald or powder coat Chrome.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eBolts directly to stock control arms and front bushings.\u003c\/p\u003e\n\u003cp\u003eAlso works with Xcessive Front Tension rod Mounts with upgraded Sphericals.\u003c\/p\u003e\n\u003cp\u003eIncreases max capacity of steering\u003c\/p\u003e\n\u003cp\u003eSold in pairs, with all required hardware.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786623488304,"sku":"T-AE86-FTR-E","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae_front_suspension_6__1.jpg?v=1778848246"},{"product_id":"ae86-4ag-fan-shroud","title":"AE86 4AG Fan Shroud","description":"\u003cp\u003eThis is the same aluminum shroud in our kit, just without the fan\u003c\/p\u003e\n\u003cp\u003eThe aluminum shroud is made from .125\" thick 6061 T6 sheet with mounting holes to bolt directly onto the Koyo radiator. The fan mounting holes are designed for a 16\" slim line fan, no extra tabs or mounts required.\u003c\/p\u003e\n\u003cp\u003eAll required bolting hardware is included for the fan and shroud, the only part we recommend is getting is some foam tape to seal off any gaps between the shroud and radiator for maximum cooling.\u003c\/p\u003e\n\u003cp\u003eWhen used with a slim line 14\" fan, the overall thickness is 3.25\"  when measured from the radiator face .\u003c\/p\u003e\n\u003cp\u003eWe have not tested the shroud on stock radiators. If you'd like to measure one, we can compare the dimensions for fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: #ff0000;\"\u003eRadiator and fan not included\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786623521072,"sku":"T-AE86-4AG-FS","price":84.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/AE86Radiatorfanshroud1.jpg?v=1778848247"},{"product_id":"ae86-front-suspension-chrome","title":"AE86 Front Suspension - Chrome","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eFront Lower Arms\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e Our all new front control arm design is a fixed 25mm extended and features a fully boxed arm made from only 4 welded components, the Spherical mount, two main beam halves and the lower ball joint nose section. By keeping components to a minimum and maximizing formed metal, we've reduced welding, increased strength and can deliver an extremely strong arm without the higher cost that comes from lot of welding.\u003c\/p\u003e\n\u003cp\u003e All lot of manufacturers tout \"TIG\" welding as the only way to fabricate, but we find they usually have poor engineering with welds on every corner. You can use the \"Best\" process, but it doesn't compensate for bad designs. By moving the welds away from the high stress corners, we increase strength and dramatically increase the arms ability to take impacts with no worry if a corner weld splitting. Fabricating our way also significantly reduces heat in the material from extensive welding which causes it's own material stress and distortion. If you fold a cardboard box and tape the top and bottom shut right down the middle, it's quite a strong box, now cut the sides off and tape those back together. Which box do you want, the one with the formed sides or the one with taped sides?\u003c\/p\u003e\n\u003cp\u003eWe've used a replaceable Teflon lined spherical bearing for the chassis mounting point instead of a bushing, this is intended to keep deflection down and allow for good articulation of Caster. Typically when you pull arms forward to increase Caster, the inner rubber or Poly bushing will pinch on the corners and cause premature wear and possible failure. We've also used Stainless Steel spacers on the spherical to pass the main bolt through. This is not the place to use softer aluminum that can deform over time from the impacts front wheels can see. The stainless also ensures that any water and grime won't rust up the bolt, making it hard to service.\u003c\/p\u003e\n\u003cp\u003eThe outer ball joint is a factory type unit, they have greater articulation angles then heims and are sealed and greased. If you've ever had a factory car go 100K+ miles on a stock ball joint, you'll understand the benefits of using them, not to mention they're readily available at any auto parts store.\u003c\/p\u003e\n\u003cp\u003eThe 25mm extended length has become a commonly know standard, while we had made arms with the ability for more width, we found that we always came back to 25mm and wished we just has simple solid arm with long life components, so that's what we've made.\u003c\/p\u003e\n\u003cp\u003eThe arms can use any tension rod that mounts up to the factory lower control arm mounting points, such as our single rod OEM style adjustable tension rods. You can get plenty of Caster adjustment while maintaining an ultra simple design that has extremely low component wear and failure rate.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eFront Tension Rod Mounts\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThere is a lot of fabrication engineering packed into these simple brackets. Increasing strength, maintaining all factory mount locations and types as well as upgrades like an optional Spherical Tension rod mount that works with OEM type tension rods.\u003c\/p\u003e\n\u003cp\u003eYou can put a lot of effort and cost into improving all the components on the front end, but if you leave the stock lightweight mounting points, are you getting the most out of your upgrades? We've been making the best front crossmembers for years, it's time to upgrade the tension rod mounts.\u003c\/p\u003e\n\u003cp\u003eMade from .105\"(2.65mm)steel, we've not only beefed up the material thickness, but streamlined the design while adding double plated on mounting points. The stock brackets were never designed for the higher loads, bigger high offset wheels, more aggressive braking and definitely not full lock impacts or increased body torsional loads.\u003c\/p\u003e\n\u003cp\u003eThese front mounts will only work with OEM threaded rod type Tension rods like our XM adjustable mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eFront \nTension rods\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe've designed these front tension rods with simplicity in mind, no fancy parts that cost more money to do a simple job, just tough and functional. The Corolla factory design has some good qualities, if you can keep them to your advantage. A lot of companies that make Heim style tension rods don't factor in that they shorten the swing radius of the tension rod. This increases Caster deviation throughout the range of motion. Did you want to increase the amount of Caster variability?\u003c\/p\u003e\n\u003cp\u003eIf you want a more solid front mounting arrangement then the stock rubber or our Polyurethane units, we also offer all new Tension Rod Mounts with built in Spherical bearings.\u003c\/p\u003e\n\u003cp\u003eMade from 16mm steel bar with a heavy welded control arm mounting point, we've delivered some necessary features in a simple design. Who knows, maybe The engineers at Toyota were actually pretty smart?\u003c\/p\u003e\n\u003cp\u003eWith the front section fully threaded, all the Caster adjustment is done up front with just two nuts, just like factory. This has allowed us to keep the center section slimmer and cleaner so your tires and rims don't tag an adjuster sleeve causing damage and running the risk of jarring things loose. This design has also allowed us to offset the rod section through the middle to gain approximately 5\/8\" more tire clearance over stock arms and up to 1\" more than center adjust styles tension rods allowing for more steering angle before the tire hits the tension rod.\u003c\/p\u003e\n\u003cp\u003eSomething else people are not usually concerned with but is good to keep in mind, since drifting doesn't always go as planned, these arms are fixable. With the simple design and lack of exotic parts, you can straighten, re-weld and re-use these if they get damaged. You can also call us if you need to replace just one, we manufacture in house and can deliver on single side replacements!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eFront \nTension rod Bushings\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTension rod bushings are such a simple part and play an important part in the overall handling of the front end. Those no question that factory rubber bushings are fine for street use, if they're not cracked from age. Polyurethane is the easy way to tighten up the Tension rod and add accuracy to the steering without sacrificing ride and NVH absorption.\u003c\/p\u003e\n\u003cp\u003eOur poly bushing kit is designed to work on will factory style fitment tension rods, such as our aftermarket tension rods. The 80A durometer is nice upgrade from stock rubber without being harsh, making them a good medium between stock and competition. The polyurethane also has a high life expectancy, greater than the factory rubber.\u003c\/p\u003e\n\u003cp\u003eWe've also included new washers to make the whole package a clean install.\u003c\/p\u003e\n\u003cp\u003eAll of our Poly bushings are manufactured in America at an ISO9001 certified facility using our own molds. We don't sell other manufacturers products with our name on it and we don't wait for \"containers\" to come in with our products. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eFront Mounts, Tension rods and bushings are sold as independent pairs. IE, Front Mounts do NOT come with tension rods and bushings. They must be selected independently for purchase.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Front Lower Arms \/ None \/ None","offer_id":66786623553840,"sku":"T-AE86-FLCA-C","price":352.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ None \/ Tension Rods + Bushings","offer_id":66786623586608,"sku":"T-AE86-FLCA-C, T-AE86-FTR-C, T-FTRB","price":529.5,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ None \/ Tension Rods only","offer_id":66786623619376,"sku":"T-AE86-FLCA-C, T-AE86-FTR-C","price":492.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ None \/ Tension Rod Bushings only","offer_id":66786623652144,"sku":"T-AE86-FLCA-C, T-FTRB","price":389.5,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Bushing Type \/ None","offer_id":66786623684912,"sku":"T-AE86-FLCA-C, T-AE86-FTRM-C-OEM","price":710.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Bushing Type \/ Tension Rods + Bushings","offer_id":66786623717680,"sku":"T-AE86-FLCA-C, T-AE86-FTRM-C-OEM, T-AE86-FTR-C, T-FTRB","price":887.5,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Bushing Type \/ Tension Rods only","offer_id":66786623750448,"sku":"T-AE86-FLCA-C, T-AE86-FTRM-C-OEM, T-AE86-FTR-C","price":850.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Bushing Type \/ Tension Rod Bushings only","offer_id":66786623783216,"sku":"T-AE86-FLCA-C, T-AE86-FTRM-C-OEM, T-FTRB","price":747.5,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Spherical \/ None","offer_id":66786623815984,"sku":"T-AE86-FLCA-C, T-AE86-FTRM-C-SP","price":747.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Spherical \/ Tension Rods + Bushings","offer_id":66786623848752,"sku":"T-AE86-FLCA-C, T-AE86-FTRM-C-SP, T-AE86-FTR-C, T-FTRB","price":924.5,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Spherical \/ Tension Rods only","offer_id":66786623881520,"sku":"T-AE86-FLCA-C, T-AE86-FTRM-C-SP, T-AE86-FTR-C","price":887.0,"currency_code":"USD","in_stock":true},{"title":"Front Lower Arms \/ Tension Rod Mounts - Spherical \/ Tension Rod Bushings only","offer_id":66786623914288,"sku":"T-AE86-FLCA-C, T-AE86-FTRM-C-SP, T-FTRB","price":784.5,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Tension Rods + Bushings","offer_id":66786623947056,"sku":"T-AE86-FTR-C, T-FTRB","price":177.5,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Tension Rods only","offer_id":66786623979824,"sku":"T-AE86-FTR-C","price":140.0,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Tension Rod Bushings only","offer_id":66786624012592,"sku":"T-FTRB","price":37.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Bushing Type \/ None","offer_id":66786624045360,"sku":"T-AE86-FTRM-C-OEM","price":358.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Bushing Type \/ Tension Rods + Bushings","offer_id":66786624078128,"sku":"T-AE86-FTRM-C-OEM, T-AE86-FTR-C, T-FTRB","price":535.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Bushing Type \/ Tension Rods only","offer_id":66786624110896,"sku":"T-AE86-FTRM-C-OEM, T-AE86-FTR-C","price":498.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Bushing Type \/ Tension Rod Bushings only","offer_id":66786624143664,"sku":"T-AE86-FTRM-C-OEM, T-FTRB","price":395.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Spherical \/ None","offer_id":66786624176432,"sku":"T-AE86-FTRM-C-SP","price":395.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Spherical \/ Tension Rods + Bushings","offer_id":66786624209200,"sku":"T-AE86-FTRM-C-SP, T-AE86-FTR-C, T-FTRB","price":572.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Spherical \/ Tension Rods only","offer_id":66786624241968,"sku":"T-AE86-FTRM-C-OEM, T-AE86-FTR-C","price":535.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Tension Rod Mounts - Spherical \/ Tension Rod Bushings only","offer_id":66786624274736,"sku":"T-AE86-FTRM-C-SP, T-FTRB","price":432.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae_front_suspension_2__1.jpg?v=1778848247"},{"product_id":"ae86-front-tension-rod-mounts-spherical-chrome","title":"AE86 Front Tension Rod Mounts - Spherical - Chrome","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eThere is a lot of fabrication engineering packed into these simple brackets. Increasing strength, maintaining all factory mount locations and types as well as upgrades like an optional Spherical Tension rod mount that works with OEM type tension rods.\u003c\/p\u003e\n\u003cp\u003eYou can put a lot of effort and cost into improving all the components on the front end, but if you leave the stock lightweight mounting points, are you getting the most out of your upgrades? We've been making the best front crossmembers for years, it's time to upgrade the tension rod mounts.\u003c\/p\u003e\n\u003cp\u003eMade from .105\"(2.65mm)steel, we've not only beefed up the material thickness, but streamlined the design while adding double plated on mounting points. The stock brackets were never designed for the higher loads, bigger high offset wheels, more aggressive braking and definitely not full lock impacts or increased body torsional loads.\u003c\/p\u003e\n\u003cp\u003eThese front mounts will only work with OEM threaded rod type Tension rods like our XM adjustable mounts.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eOffered in powder coat Metallic Emerald or powder coat Chrome.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eBolts directly to stock mounting points.\u003c\/p\u003e\n\u003cp\u003eUpgrades tension rod mount point to Spherical without adapters\u003c\/p\u003e\n\u003cp\u003eSold in pairs.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786624307504,"sku":"T-AE86-FTRM-SP-C","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae_front_suspension1_4.jpg?v=1778848247"},{"product_id":"corolla-celica-axle-brackets-3-0","title":"Corolla\/Celica Axle Brackets - 3.0\"","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eIf you're looking to do an axle swap in your E chassis or put an E type multilink axle under a different car, you'll want these axle brackets to do the job. If you're thinking about cutting off a set of stock brackets and re-using them, you can be in for a fair bit of work. When you get them cut off, the brackets are old, rusty, cut up and no longer match the shape of the axle tubes and often times have suspension mounting holes that are no longer round and you will still need to buy geometry correction brackets for lowered cars or more traction.\u003c\/p\u003e\n\u003cp\u003eOur all new brackets are CNC cut from 1\/8\" (3mm) steel then formed to work with stock type suspension components. We've also made them with multiple geometry correction points already built in so you won't need to buy any bolt on correction brackets as well. We've also maintained the stock mounting points to keep the hardware legal for sanctioning bodies that require stock mounting geometry.\u003c\/p\u003e\n\u003cp\u003eWe leave the brackets with all the material on all sides intact. We believe these are not parts that should be \"lightened out\" or have logos cut into them reducing strength.\u003c\/p\u003e\n\u003cp\u003eIt should be noted that these brackets are designed for AE\/TE chassis and the geometry is correct accordingly. IF YOU'RE SWAPPING TO A DIFFERENT CHASSIS, LIKE A CELICA, YOU MAY NEED TO ADJUST FITMENT. Not all Celica's use the same body mount points or arms, so not all swap situations are the same.\u003c\/p\u003e\n\u003cp\u003eWe offer the lower shock mounts in two versions, relocated inward for more tire clearance that with some True Type coils may not fit such as Fortune Auto (inverted spring). Other brands such as BC Racing and Stance work without issue (top spring). We also offer the Offset shock position that is the same as OEM placement if you have concerns with True Type coil overs or other fitment.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Inboard Lower Mounts - Pair \/ None \/ None","offer_id":66786624373040,"sku":"T-EXX-AB-LM-30","price":98.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ None \/ Axle - Sway Bar Pad - Pair","offer_id":66786624405808,"sku":"T-EXX-AB-LM-30, T-EXX-30-SBP","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ None \/ Axle Spring Pad set","offer_id":66786624438576,"sku":"T-EXX-AB-LM-30, T-EXX-30-SP","price":236.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ None \/ Sway Bar Pads + Spring Pads","offer_id":66786624471344,"sku":"T-EXX-AB-LM-30, T-EXX-30-SBP, T-EXX-30-SP","price":273.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper Mounts - Pair \/ None","offer_id":66786624504112,"sku":"T-EXX-AB-LM-30, T-EXX-UM-30","price":155.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper Mounts - Pair \/ Axle - Sway Bar Pad - Pair","offer_id":66786624536880,"sku":"T-EXX-AB-LM-30, T-EXX-UM-30, T-EXX-30-SBP","price":192.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper Mounts - Pair \/ Axle Spring Pad set","offer_id":66786624569648,"sku":"T-EXX-AB-LM-30, T-EXX-UM-30, T-EXX-30-SP","price":293.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper Mounts - Pair \/ Sway Bar Pads + Spring Pads","offer_id":66786624602416,"sku":"T-EXX-AB-LM-30, T-EXX-UM-30, T-EXX-30-SBP, T-EXX-30-SP","price":330.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Panhard Mount \/ None","offer_id":66786624635184,"sku":"T-EXX-AB-LM-30, T-EXX-PM-30","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Panhard Mount \/ Axle - Sway Bar Pad - Pair","offer_id":66786624667952,"sku":"T-EXX-AB-LM-30, T-EXX-PM-30, T-EXX-30-SBP","price":182.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Panhard Mount \/ Axle Spring Pad set","offer_id":66786624700720,"sku":"T-EXX-AB-LM-30, T-EXX-PM-30, T-EXX-30-SP","price":283.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Panhard Mount \/ Sway Bar Pads + Spring Pads","offer_id":66786624733488,"sku":"T-EXX-AB-LM-30, T-EXX-PM-30, T-EXX-30-SBP, T-EXX-30-SP","price":320.0,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper + Panhard \/ None","offer_id":66786624766256,"sku":"T-EXX-AB-LM-30, T-EXX-UM-30, T-EXX-PM-30","price":202.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper + Panhard \/ Axle - Sway Bar Pad - Pair","offer_id":66786624799024,"sku":"T-EXX-AB-LM-30, T-EXX-UM-30, T-EXX-PM-30, T-EXX-30-SBP","price":239.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper + Panhard \/ Axle Spring Pad set","offer_id":66786624831792,"sku":"T-EXX-AB-LM-30, T-EXX-UM-30, T-EXX-PM-30, T-EXX-30-SP","price":340.5,"currency_code":"USD","in_stock":true},{"title":"Inboard Lower Mounts - Pair \/ Upper + Panhard \/ Sway Bar Pads + Spring Pads","offer_id":66786624864560,"sku":"T-EXX-AB-LM-30, T-EXX-UM-30, T-EXX-PM-30, T-EXX-30-SBP, T-EXX-30-SP","price":377.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ None \/ None","offer_id":66786624897328,"sku":"T-EXX-AB-LM-O-30","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ None \/ Axle - Sway Bar Pad - Pair","offer_id":66786624930096,"sku":"T-EXX-AB-LM-O-30, T-EXX-30-SBP","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ None \/ Axle Spring Pad set","offer_id":66786624962864,"sku":"T-EXX-AB-LM-O-30, T-EXX-30-SP","price":246.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ None \/ Sway Bar Pads + Spring Pads","offer_id":66786624995632,"sku":"T-EXX-AB-LM-O-30, T-EXX-30-SBP, T-EXX-30-SP","price":283.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper Mounts - Pair \/ None","offer_id":66786625028400,"sku":"T-EXX-AB-LM-O-30, T-EXX-UM-30","price":165.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper Mounts - Pair \/ Axle - Sway Bar Pad - Pair","offer_id":66786625061168,"sku":"T-EXX-AB-LM-O-30, T-EXX-UM-30, T-EXX-30-SBP","price":202.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper Mounts - Pair \/ Axle Spring Pad set","offer_id":66786625093936,"sku":"T-EXX-AB-LM-O-30, T-EXX-UM-30, T-EXX-30-SP","price":303.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper Mounts - Pair \/ Sway Bar Pads + Spring Pads","offer_id":66786625126704,"sku":"T-EXX-AB-LM-O-30, T-EXX-UM-30, T-EXX-30-SBP, T-EXX-30-SP","price":340.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Panhard Mount \/ None","offer_id":66786625159472,"sku":"T-EXX-AB-LM-O-30, T-EXX-PM-30","price":155.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Panhard Mount \/ Axle - Sway Bar Pad - Pair","offer_id":66786625192240,"sku":"T-EXX-AB-LM-O-30, T-EXX-PM-30, T-EXX-30-SBP","price":192.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Panhard Mount \/ Axle Spring Pad set","offer_id":66786625225008,"sku":"T-EXX-AB-LM-O-30, T-EXX-PM-30, T-EXX-30-SP","price":293.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Panhard Mount \/ Sway Bar Pads + Spring Pads","offer_id":66786625257776,"sku":"T-EXX-AB-LM-O-30, T-EXX-PM-30, T-EXX-30-SBP, T-EXX-30-SP","price":330.0,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper + Panhard \/ None","offer_id":66786625290544,"sku":"T-EXX-AB-LM-O-30, T-EXX-UM-30, T-EXX-PM-30","price":212.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper + Panhard \/ Axle - Sway Bar Pad - Pair","offer_id":66786625323312,"sku":"T-EXX-AB-LM-O-30, T-EXX-UM-30, T-EXX-PM-30, T-EXX-30-SBP","price":249.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper + Panhard \/ Axle Spring Pad set","offer_id":66786625356080,"sku":"T-EXX-AB-LM-O-30, T-EXX-UM-30, T-EXX-PM-30, T-EXX-30-SP","price":350.5,"currency_code":"USD","in_stock":true},{"title":"Offset Lower Mounts - Pair \/ Upper + Panhard \/ Sway Bar Pads + Spring Pads","offer_id":66786625388848,"sku":"T-EXX-AB-LM-O-30, T-EXX-UM-30, T-EXX-PM-30, T-EXX-30-SBP, T-EXX-30-SP","price":387.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/e_chassis_axel_brackets_1_1b8f7882-db8b-49ac-b48e-0b901d2f7d7e.jpg?v=1778848247"},{"product_id":"ae86-4ag-koyo-radiator","title":"AE86 4AG Koyo Radiator","description":"\u003cp\u003eAE86 4AG Koyo Radiator\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786624340272,"sku":"T-AE86-4AG-KOYO","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/koyo.jpg?v=1778848246"},{"product_id":"ae86-front-tension-rod-mounts-spherical-emerald","title":"AE86 Front Tension Rod Mounts - Spherical - Emerald","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eThere is a lot of fabrication engineering packed into these simple brackets. Increasing strength, maintaining all factory mount locations and types as well as upgrades like an optional Spherical Tension rod mount that works with OEM type tension rods.\u003c\/p\u003e\n\u003cp\u003eYou can put a lot of effort and cost into improving all the components on the front end, but if you leave the stock lightweight mounting points, are you getting the most out of your upgrades? We've been making the best front crossmembers for years, it's time to upgrade the tension rod mounts.\u003c\/p\u003e\n\u003cp\u003eMade from .105\"(2.65mm)steel, we've not only beefed up the material thickness, but streamlined the design while adding double plated on mounting points. The stock brackets were never designed for the higher loads, bigger high offset wheels, more aggressive braking and definitely not full lock impacts or increased body torsional loads.\u003c\/p\u003e\n\u003cp\u003eThese front mounts will only work with OEM threaded rod type Tension rods like our XM adjustable mounts.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eOffered in powder coat Metallic Emerald or powder coat Chrome.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eBolts directly to stock mounting points.\u003c\/p\u003e\n\u003cp\u003eUpgrades tension rod mount point to Spherical without adapters\u003c\/p\u003e\n\u003cp\u003eSold in pairs.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786625421616,"sku":"T-AE86-FTRM-SP-E","price":372.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae_front_suspension7_1.jpg?v=1778848247"},{"product_id":"ae86-4ag-koyo-radiator-and-parts","title":"AE86 4AG Koyo Radiator and parts","description":"\u003cp\u003e  The stock radiator is good for stock driving. Motor swaps and harder driving require better cooling. We've got all the parts you need to help keep your engine cool!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eKoyo Radiator - BEAMS swap\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e   There's not much to say here, Koyo is one of the best. Larger capacity, double row cooling, stock chassis fitment with hose configurations for BEAMS swaps and an all brazed aluminum construction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e     Fits with stock upper and lower mounts. We also offer bolt on fan shrouds and fans.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eRadiator caps\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e   We've got two options for the radiator caps, stock type replacement and the Koyo.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e  The stock type replacement has a .9 bar rating while the Koyo performance unit is rated at 1.3 bar.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFan Shrouds and Fans\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e    We've made a nice aluminum fan shroud for mounting up a 14\" electric fan to make sure things cool down. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e   The two fans are a simple curved blade fan that will run a bit quieter then the Spal straight blade. While the Spal will be a louder, it does have a bit more airflow.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFan Mounting Ties\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e    If you don't want to run a fan shroud, we offer fan mounting ties to put the fan directly onto the radiator core.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e    The tie push through the fan fins and fan mounting tabs. The kit comes with 4 ties, foam pads, keeper nuts and springs if you want them to hold pressure or go without the springs to just hold with nut pressure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e    If you want to mount a fan directly to the radiator, it will be best to measure the radiator core to gage fan size. We typically offer a larger fan that works with our shroud and may be to large to directly fit the radiator core.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"AE86 4AG Koyo Radiator \/ None \/ None","offer_id":66786625454384,"sku":"T-AE86-4AG-KOYO","price":390.0,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ None \/ Koyo Cap","offer_id":66786625487152,"sku":"T-AE86-4AG-KOYO, UH-RC-S2","price":424.5,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ None \/ OE Style Cap","offer_id":66786625519920,"sku":"T-AE86-4AG-KOYO, UH-RC-S1","price":397.25,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ None \/ Fan Shroud Seal Tape","offer_id":66786625552688,"sku":"T-AE86-4AG-KOYO, UH-RFSS","price":401.0,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ None \/ Koyo Cap + Tape","offer_id":66786625585456,"sku":"T-AE86-4AG-KOYO, UH-RC-S2, UH-RFSS","price":435.5,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ None \/ OE Cap + Tape","offer_id":66786625618224,"sku":"T-AE86-4AG-KOYO, UH-RC-S1, UH-RFSS","price":408.25,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Straight - 1274 CFM \/ None","offer_id":66786625650992,"sku":"T-AE86-4AG-KOYO, UH-RF-SP14-S","price":496.0,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Straight - 1274 CFM \/ Koyo Cap","offer_id":66786625683760,"sku":"T-AE86-4AG-KOYO, UH-RF-SP14-S, UH-RC-S2","price":530.86,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Straight - 1274 CFM \/ OE Style Cap","offer_id":66786625716528,"sku":"T-AE86-4AG-KOYO, UH-RF-SP14-S, UH-RC-S1","price":503.61,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Straight - 1274 CFM \/ Fan Shroud Seal Tape","offer_id":66786625749296,"sku":"T-AE86-4AG-KOYO, UH-RF-SP14-S, UH-RFSS","price":507.36,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Straight - 1274 CFM \/ Koyo Cap + Tape","offer_id":66786625782064,"sku":"T-AE86-4AG-KOYO, UH-RF-SP14-S, UH-RC-S2, UH-RFSS","price":541.86,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Straight - 1274 CFM \/ OE Cap + Tape","offer_id":66786625814832,"sku":"T-AE86-4AG-KOYO, UH-RF-SP14-S, UH-RC-S1, UH-RFSS","price":514.61,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Curved - 1652 CFM \/ None","offer_id":66786625847600,"sku":"T-AE86-4AG-KOYO, UH-RF-SP14-C","price":562.66,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Curved - 1652 CFM \/ Koyo Cap","offer_id":66786625880368,"sku":"T-AE86-4AG-KOYO, UH-RF-SP14-C, UH-RC-S2","price":597.16,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Curved - 1652 CFM \/ OE Style Cap","offer_id":66786625913136,"sku":"T-AE86-4AG-KOYO, UH-RF-SP14-C, UH-RC-S1","price":569.91,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Curved - 1652 CFM \/ Fan Shroud Seal Tape","offer_id":66786625945904,"sku":"T-AE86-4AG-KOYO, UH-RF-SP14-C, UH-RFSS","price":573.66,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Curved - 1652 CFM \/ Koyo Cap + Tape","offer_id":66786625978672,"sku":"T-AE86-4AG-KOYO, UH-RF-SP14-C, UH-RC-S2, UH-RFSS","price":608.16,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Spal 14 Fan - Curved - 1652 CFM \/ OE Cap + Tape","offer_id":66786626011440,"sku":"T-AE86-4AG-KOYO, UH-RC-S1, UH-RFSS","price":580.91,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Economy 14 Fan - 950 CFM \/ None","offer_id":66786626044208,"sku":"T-AE86-4AG-KOYO, UH-RF-E14-C","price":455.0,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Economy 14 Fan - 950 CFM \/ Koyo Cap","offer_id":66786626076976,"sku":"T-AE86-4AG-KOYO, UH-RF-E14-C, UH-RC-S2","price":489.5,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Economy 14 Fan - 950 CFM \/ OE Style Cap","offer_id":66786626109744,"sku":"T-AE86-4AG-KOYO, UH-RF-E14-C, UH-RC-S1","price":462.25,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Economy 14 Fan - 950 CFM \/ Fan Shroud Seal Tape","offer_id":66786626142512,"sku":"T-AE86-4AG-KOYO, UH-RF-E14-C, UH-RFSS","price":466.0,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Economy 14 Fan - 950 CFM \/ Koyo Cap + Tape","offer_id":66786626175280,"sku":"T-AE86-4AG-KOYO, UH-RF-E14-C, UH-RC-S2, UH-RFSS","price":500.5,"currency_code":"USD","in_stock":true},{"title":"AE86 4AG Koyo Radiator \/ Economy 14 Fan - 950 CFM \/ OE Cap + Tape","offer_id":66786626208048,"sku":"T-AE86-4AG-KOYO, UH-RF-E14-C, UH-RC-S1, UH-RFSS","price":473.25,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ None \/ None","offer_id":66786626240816,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS","price":474.0,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ None \/ Koyo Cap","offer_id":66786626273584,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RC-S2","price":508.5,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ None \/ OE Style Cap","offer_id":66786626306352,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RC-S2","price":481.25,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ None \/ Fan Shroud Seal Tape","offer_id":66786626339120,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RFSS","price":485.0,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ None \/ Koyo Cap + Tape","offer_id":66786626371888,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RC-S2, UH-RFSS","price":519.5,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ None \/ OE Cap + Tape","offer_id":66786626404656,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RC-S1, UH-RFSS","price":491.25,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ None","offer_id":66786626437424,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-S","price":580.36,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ Koyo Cap","offer_id":66786626470192,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-S, UH-RC-S2","price":614.86,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ OE Style Cap","offer_id":66786626502960,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-S, UH-RC-S1","price":587.61,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ Fan Shroud Seal Tape","offer_id":66786626535728,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-S, UH-RFSS","price":591.36,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ Koyo Cap + Tape","offer_id":66786626568496,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-S, UH-RC-S2, UH-RFSS","price":625.86,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ OE Cap + Tape","offer_id":66786626601264,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-S, UH-RC-S1, UH-RFSS","price":597.61,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ None","offer_id":66786626634032,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-C","price":646.66,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ Koyo Cap","offer_id":66786626666800,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-C, UH-RC-S2","price":682.0,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ OE Style Cap","offer_id":66786626699568,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-C, UH-RC-S1","price":653.91,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ Fan Shroud Seal Tape","offer_id":66786626732336,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-C, UH-RFSS","price":657.66,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ Koyo Cap + Tape","offer_id":66786626765104,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-C, UH-RC-S2, UH-RFSS","price":692.16,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ OE Cap + Tape","offer_id":66786626797872,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-SP14-C, UH-RC-S1, UH-RFSS","price":663.91,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Economy 14 Fan - 950 CFM \/ None","offer_id":66786626830640,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-E14-C","price":539.0,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Economy 14 Fan - 950 CFM \/ Koyo Cap","offer_id":66786626863408,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-E14-C, UH-RC-S2","price":573.5,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Economy 14 Fan - 950 CFM \/ OE Style Cap","offer_id":66786626896176,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-E14-C, UH-RC-S1","price":545.25,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Economy 14 Fan - 950 CFM \/ Fan Shroud Seal Tape","offer_id":66786626928944,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-E14-C, UH-RFSS","price":550.0,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Economy 14 Fan - 950 CFM \/ Koyo Cap + Tape","offer_id":66786626961712,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-E14-C, UH-RC-S2, UH-RFSS","price":585.5,"currency_code":"USD","in_stock":true},{"title":"Koyo Radiator and Fan Shroud \/ Economy 14 Fan - 950 CFM \/ OE Cap + Tape","offer_id":66786626994480,"sku":"T-AE86-4AG-KOYO, T-AE86-4AG-FS, UH-RF-E14-C, UH-RC-S1, UH-RFSS","price":557.25,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Koyo Cap","offer_id":66786627027248,"sku":"UH-RC-S2","price":34.5,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ OE Style Cap","offer_id":66786627060016,"sku":"UH-RC-S1","price":7.25,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Fan Shroud Seal Tape","offer_id":66786627092784,"sku":"UH-RFSS","price":11.0,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Koyo Cap + Tape","offer_id":66786627125552,"sku":"UH-RC-S2, UH-RFSS","price":45.5,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ OE Cap + Tape","offer_id":66786627158320,"sku":"UH-RC-S1, UH-RFSS","price":28.25,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ None","offer_id":66786627191088,"sku":"UH-RF-SP14-S","price":106.36,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ Koyo Cap","offer_id":66786627223856,"sku":"UH-RF-SP14-S, UH-RC-S2","price":140.86,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ OE Style Cap","offer_id":66786627256624,"sku":"UH-RF-SP14-S, UH-RC-S1","price":113.61,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ Fan Shroud Seal Tape","offer_id":66786627289392,"sku":"UH-RF-SP14-S, UH-RFSS","price":117.36,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ Koyo Cap + Tape","offer_id":66786627322160,"sku":"UH-RF-SP14-S, UH-RC-S2, UH-RFSS","price":151.86,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ OE Cap + Tape","offer_id":66786627354928,"sku":"UH-RF-SP14-S, UH-RC-S1, UH-RFSS","price":124.61,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ None","offer_id":66786627387696,"sku":"UH-RF-SP14-C","price":172.66,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ Koyo Cap","offer_id":66786627420464,"sku":"UH-RF-SP14-C, UH-RC-S2","price":207.16,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ OE Style Cap","offer_id":66786627453232,"sku":"UH-RF-SP14-C, UH-RC-S1","price":179.91,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ Fan Shroud Seal Tape","offer_id":66786627486000,"sku":"UH-RF-SP14-C, UH-RFSS","price":183.66,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ Koyo Cap + Tape","offer_id":66786627518768,"sku":"UH-RF-SP14-C, UH-RC-S2, UH-RFSS","price":218.16,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ OE Cap + Tape","offer_id":66786627551536,"sku":"UH-RF-SP14-C, UH-RC-S1, UH-RFSS","price":190.91,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ None","offer_id":66786627584304,"sku":"UH-RF-E14-C","price":65.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ Koyo Cap","offer_id":66786627617072,"sku":"UH-RF-E14-C, UH-RC-S2","price":99.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ OE Style Cap","offer_id":66786627649840,"sku":"UH-RF-E14-C, UH-RC-S1","price":72.25,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ Fan Shroud Seal Tape","offer_id":66786627682608,"sku":"UH-RF-E14-C, UH-RFSS","price":76.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ Koyo Cap + Tape","offer_id":66786627715376,"sku":"UH-RF-E14-C, UH-RC-S2, UH-RFSS","price":34.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ OE Cap + Tape","offer_id":66786627748144,"sku":"UH-RF-E14-C, UH-RC-S1, UH-RFSS","price":83.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/Koyo_de618016-474f-4398-a2fd-699975cb8ba8.jpg?v=1778848247"},{"product_id":"ae86-beams-koyo-radiator-and-parts","title":"AE86 BEAMS Koyo Radiator and parts","description":"\u003cp\u003e  The stock radiator is good for stock driving. Motor swaps and harder driving require better cooling. We've got all the parts you need to help keep your engine cool!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003eKoyo Radiator - BEAMS swap\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e   There's not much to say here, Koyo is one of the best. Larger capacity, double row cooling, stock chassis fitment with hose configurations for BEAMS swaps and an all brazed aluminum construction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e     Fits with stock upper and lower mounts. We also offer bolt on fan shrouds and fans.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eRadiator caps\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e   We've got two options for the radiator caps, stock type replacement and the Koyo.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e  The stock type replacement has a .9 bar rating while the Koyo performance unit is rated at 1.3 bar.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFan Shrouds and Fans\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e    We've made a nice aluminum fan shroud for mounting up a 14\" electric fan to make sure things cool down. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e   The two fans are a simple curved blade fan that will run a bit quieter then the Spal straight blade. While the Spal will be a louder, it does have a bit more airflow.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFan Mounting Ties\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e    If you don't want to run a fan shroud, we offer fan mounting ties to put the fan directly onto the radiator core.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e    The tie push through the fan fins and fan mounting tabs. The kit comes with 4 ties, foam pads, keeper nuts and springs if you want them to hold pressure or go without the springs to just hold with nut pressure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e    If you want to mount a fan directly to the radiator, it will be best to measure the radiator core to gage fan size. We typically offer a larger fan that works with our shroud and may be to large to directly fit the radiator core.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"None \/ None \/ None","offer_id":66786627813680,"sku":"T-AE86-RP","price":410.0,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Koyo","offer_id":66786627846448,"sku":"T-AE86-RP, UH-RC-S2","price":445.5,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ OE","offer_id":66786627879216,"sku":"T-AE86-RP, UH-RC-S1","price":416.25,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Fan Shroud Seal Tape","offer_id":66786627911984,"sku":"T-AE86-RP, UH-RFSS","price":420.0,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Koyo + Tape","offer_id":66786627944752,"sku":"T-AE86-RP, UH-RC-S2, UH-RFSS","price":455.5,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ OE + Tape","offer_id":66786627977520,"sku":"T-AE86-RP, UH-RC-S1, UH-RFSS","price":426.25,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ None","offer_id":66786628010288,"sku":"T-AE86-RP, UH-RF-SP14-S","price":516.36,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ Koyo","offer_id":66786628043056,"sku":"T-AE86-RP, UH-RF-SP14-S, UH-RC-S2","price":550.86,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ OE","offer_id":66786628075824,"sku":"T-AE86-RP, UH-RF-SP14-S, UH-RC-S1","price":522.61,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ Fan Shroud Seal Tape","offer_id":66786628108592,"sku":"T-AE86-RP, UH-RF-SP14-S, UH-RFSS","price":526.36,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ Koyo + Tape","offer_id":66786628141360,"sku":"T-AE86-RP, UH-RF-SP14-S, UH-RC-S2, UH-RFSS","price":560.86,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Straight - 1274 CFM \/ OE + Tape","offer_id":66786628174128,"sku":"T-AE86-RP, UH-RF-SP14-S, UH-RC-S1, UH-RFSS","price":532.61,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ None","offer_id":66786628206896,"sku":"T-AE86-RP, UH-RF-SP14-C","price":582.66,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ Koyo","offer_id":66786628239664,"sku":"T-AE86-RP, UH-RF-SP14-C, UH-RC-S2","price":617.16,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ OE","offer_id":66786628272432,"sku":"T-AE86-RP, UH-RF-SP14-C, UH-RC-S1","price":588.91,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ Fan Shroud Seal Tape","offer_id":66786628305200,"sku":"T-AE86-RP, UH-RF-SP14-C, UH-RFSS","price":592.66,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ Koyo + Tape","offer_id":66786628337968,"sku":"T-AE86-RP, UH-RF-SP14-C, UH-RC-S2, UH-RFSS","price":627.16,"currency_code":"USD","in_stock":true},{"title":"None \/ Spal 14 Fan - Curved - 1652 CFM \/ OE + Tape","offer_id":66786628370736,"sku":"T-AE86-RP, UH-RF-SP14-C, UH-RC-S1, UH-RFSS","price":598.91,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ None","offer_id":66786628403504,"sku":"T-AE86-RP, UH-RF-E14-C","price":475.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ Koyo","offer_id":66786628436272,"sku":"T-AE86-RP, UH-RF-E14-C, UH-RC-S2","price":509.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ OE","offer_id":66786628469040,"sku":"T-AE86-RP, UH-RF-E14-C, UH-RC-S1","price":481.25,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ Fan Shroud Seal Tape","offer_id":66786628501808,"sku":"T-AE86-RP, UH-RF-E14-C, UH-RFSS","price":485.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ Koyo + Tape","offer_id":66786628534576,"sku":"T-AE86-RP, UH-RF-E14-C, UH-RC-S2, UH-RFSS","price":519.5,"currency_code":"USD","in_stock":true},{"title":"None \/ Economy 14 Fan - 950 CFM \/ OE + Tape","offer_id":66786628567344,"sku":"T-AE86-RP, UH-RF-E14-C, UH-RC-S1, UH-RFSS","price":491.25,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ None \/ None","offer_id":66786628600112,"sku":"T-AE86-RP, T-AE86-BEAMS-FS","price":494.0,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ None \/ Koyo","offer_id":66786628632880,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RC-S2","price":528.5,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ None \/ OE","offer_id":66786628665648,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RC-S1","price":500.25,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ None \/ Fan Shroud Seal Tape","offer_id":66786628698416,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RFSS","price":504.0,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ None \/ Koyo + Tape","offer_id":66786628731184,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RC-S2, UH-RFSS","price":538.5,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ None \/ OE + Tape","offer_id":66786628763952,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RC-S1, UH-RFSS","price":510.25,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ None","offer_id":66786628796720,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-S","price":600.36,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ Koyo","offer_id":66786628829488,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-S, UH-RC-S2","price":634.86,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ OE","offer_id":66786628862256,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-S, UH-RC-S1","price":606.61,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ Fan Shroud Seal Tape","offer_id":66786628895024,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-S, UH-RFSS","price":610.36,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ Koyo + Tape","offer_id":66786628927792,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-S, UH-RC-S2, UH-RFSS","price":644.86,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Straight - 1274 CFM \/ OE + Tape","offer_id":66786628960560,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-S, UH-RC-S1, UH-RFSS","price":616.61,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ None","offer_id":66786628993328,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-C","price":666.66,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ Koyo","offer_id":66786629026096,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-C, UH-RC-S2","price":701.16,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ OE","offer_id":66786629058864,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-C, UH-RC-S1","price":672.91,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ Fan Shroud Seal Tape","offer_id":66786629091632,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-C, UH-RFSS","price":676.66,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ Koyo + Tape","offer_id":66786629124400,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-C, UH-RC-S2, UH-RFSS","price":711.16,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Spal 14 Fan - Curved - 1652 CFM \/ OE + Tape","offer_id":66786629157168,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-SP14-C, UH-RC-S1, UH-RFSS","price":682.91,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Economy 14 Fan - 950 CFM \/ None","offer_id":66786629189936,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-E14-C","price":559.0,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Economy 14 Fan - 950 CFM \/ Koyo","offer_id":66786629222704,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-E14-C, UH-RC-S2","price":593.5,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Economy 14 Fan - 950 CFM \/ OE","offer_id":66786629255472,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-E14-C, UH-RC-S1","price":565.25,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Economy 14 Fan - 950 CFM \/ Fan Shroud Seal Tape","offer_id":66786629288240,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-E14-C, UH-RFSS","price":569.0,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Economy 14 Fan - 950 CFM \/ Koyo + Tape","offer_id":66786629321008,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-E14-C, UH-RC-S2, UH-RFSS","price":603.5,"currency_code":"USD","in_stock":true},{"title":"AE86 BEAMS Fan Shroud \/ Economy 14 Fan - 950 CFM \/ OE + Tape","offer_id":66786629353776,"sku":"T-AE86-RP, T-AE86-BEAMS-FS, UH-RF-E14-C, UH-RC-S1, UH-RFSS","price":575.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_radiator_and_parts1_2.jpg?v=1778848248"},{"product_id":"ae86-inner-tie-rod-boots","title":"AE86 Inner Tie Rod Boots","description":"\u003cp\u003eThese are 2.5 turn lock to lock manual racks for the AE86.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":66786627780912,"sku":"T-AE86-SR-TRB","price":29.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0398\/5456\/files\/ae86_steering_rack_and_parts3_1.jpg?v=1778848247"}],"url":"https:\/\/garagedefend.co\/es\/collections\/xcessive-manufacturing.oembed","provider":"Garage Defend","version":"1.0","type":"link"}